KVL - LOW SIDEWALL CANOPY
With Capture Jet ™ for High Effciency Extraction
Overview:
Halton KVL Low Sidewall hoods are designed for effcient capture and extraction of the emissions from fryers and grills in Quick Service Restaurants and commercial kitchens. The Capture Jet™ effectively captures the contaminated air with minimum exhaust airflow and the flame arrestor flters effciently separate particles from the thermal plume.
Features:
Typical Section & Plan:
• Effective: Capture Jet™ reduces energy consumption with up to 50% lower exhaust airflow than normal wall hoods. (Performance tested to ASTM F1704) • Efficient: KSA Filters for up to 95% removal of particles 10µm size and above. • Safe: KSA Filters for UL1046 certifed flame arrestance. • Hygienic: Stainless steel (AISI 304), welded construction. • Ease: T.A.B.™ testing and balancing taps to allow simple airflow rate balancing & commissioning. • Lights: LED down Lights provide Warm light at 500 Lux. • Options: Cladding above hood can have optional return for plate shelf (see image right) or Perforated front face for low velocity supply of make-up air.
Capture Jet Fan
Slide Damper
KSA Filter 500x330x50
Capture Jet
Typical End View
Capture Jet™ technology Up to 50%
Cyclonic filter 95% efficient on 10um and above particles
T.A.B.™ technology Quick airflow rates measurement
Exhaust Collar
600 ID
reduction in airflow rates
Capture Jet Fan Speed Contoller
Recommended Combinations:
Capture Jet Fan Collar
Capture Ray™ technology Neutralises grease vapours and particles
Impregnated Carbon Filter Reduces Urban Pollution
3
Typical Collar/Fan Size
3
3
3
*For dimensions refer to project drawing
Integrated supply air Better smoke capture and comfort
Built-in Fire Suppression Engineered & pre-installed from factory
ALLIED MEMBER
ALLIED MEMBER
R
R
Typical Specification Text:
Kitchen Exhaust Hood must be low height sidewall type (1) with Capture Jet™, UL1046 Certifed Cyclonic Filters (KSA), Capture Ray™ UV-C lamps, T.A.B.™ pressure ports and LED Down lights. The hood will be designed to performance standard ASTM1704 and manufactured from 1.2 mm AISI 304 Satin Finish with fully welded exhaust plenum. The hood will be supplied with ANSUL fre suppression and Plate Shelf option or perforated Front for integrated make-up air.
18
Made with FlippingBook - Online Brochure Maker