ATS Traffic Product Catalogue 2025/2026

High-Tension Cable Barrier / W-Beam & Thrie Beam Barrier / Guardrail End Treatments

The TL-4 barrier consists of a four-strand, high-tension cable barrier designed to contain and redirect vehicles away from hazards. The barrier is intended for use on a 4H:1V slope. TL-3 also available. Maximum Dynamic Reflection: 2.7 m Maximum Post Spacing: 6.4 m (21 ft) Contact your local branch for quotes and details.

High-Tension Barrier Permanent Barriers

Guardrail redirect vehicles that would otherwise cross the median or go off the shoulder. The W-Beam is used for longer barrier runs, while the Thrie Beam is used to protect large hazards and bridge decks. Length: 3.81 m (12.5 ft) or 7.62 m (25 ft) DESCRIPTION 31121086 W-Beam Guardrail, 12'6" long, 10 ga. 32120705 Thrie Beam Straight Rail, 1.905m PRODUCT NO.

W-Beam & Thrie Beam Permanent Barriers

The FLEAT-350 is a flared guardrail end treatment used on the blunt ends of guardrail. On impact, the unit’s head slides down the rail and curls or flattens. Typically only the posts and guardrail will need to be replaced. The flared design places the unit farther from the road, reducing nuisance hits.

PRODUCT NO.

DESCRIPTION

W-Beam End Treatment 37'6" System w/ timber posts and blocks (6'3" spacing) W-Beam End Treatment 37'6" system w/ steel posts and blocks (6'3" spacing)

31120059

Fleat-350 Guardrail End Treatments

31120506

The FLEAT-MT is a median guard rail end treatment used on the blunt ends of traffic-facing rigid guard rails. These end treatments attach to the guard rail to protect drivers in head-on collisions. On impact, the unit’s head slides down the rail and curls or flattens. PRODUCT NO. 31121121

Fleat-MT (Complete System) Steel Post - Guardrail End Treatments

123

ATS Traffic Product Catalogue

atstraffic.ca

Made with FlippingBook Digital Publishing Software