15 D
MINI IN-LINE DISPOSABLE DESICCANT DRYER
ELECTRIC TANK DRAINS FOR AIR COMPRESSOR TANKS
• Automatically drain water & contamination at set times • Increase tank life, tool life & maximize air volume • Available in 1/4”, 3/8” and 1/2” NPT • Available in 115V and 230V
• Ideal for spray guns (point of use) • 40 micron porous bronze element removes fine dirt particles, as oil removing media removes oil vapor and desiccant beads absorb water vapor • Attached directly to spray gun or mini regulator located on spray gun • Operating Temperature Range: 35˚-130˚ F
• Unit is bi-directional with 1/4” NPT • Max. Operating Pressure: 125 psi • Max. Flow Capacity: 15 SCFM
7815
7930
ATD-7820. ................................................. $32.19/2-pack
GENERAL PURPOSE FILTERS Model Number Pipe Size Max. Flow SCFM Bowl Capacity
Description (includes protective caps and O-rings)
Model Number
NPT
Voltage
Pressure
Price
Operating Temp. Range
Max. Flow Pressure
Filter Element
Bowl Type
Drain
Price
ATD-7815 ATD-7930
$277.19 $149.99
1/4” Electric Air Compressor Drain with Strainer
1/4”
115V
200 psi
ATD-7823 ATD-7824 ATD-7827 ATD-7828
$71.00 $75.39 $71.29 $80.49
1/4” 48 SCFM 5 oz.
Poly w/bowl guard Manual
40˚-125˚ F
150 psig 40 micron
1/4” Electric Air Compressor Drain with Strainer
1/4”
115V
230 psi
1/4” 48 SCFM 6 oz.
Metal w/sight glass
Manual
40˚-160˚ F
250 psig 5 micron
FIRST STAGE: • First filter - 5 micron water removing filter with 9 oz. bowl, sight glass and overnight drain SECOND STAGE: • Second filter - .01 micron oil removing filter with 9 oz. bowl, sight glass and overnight drain. THIRD STAGE: • Third filter - 2 quart desiccant filter - lowers the dew point to -40˚ F and removes all water in vapor and liquid form. FOURTH AND FIFTH STAGES: • Filtering - 3 micron filter with 9 oz. bowl and sight glass - final filter protects paint job from any possible dirt or desiccant dust or debris. Gauge included with regulator. StageAir DESICCANT DRYING SYSTEMS
1/2” 100 SCFM 5 oz.
Poly w/bowl guard Manual
40˚-125˚ F
150 psig 40 micron
1/2” 100 SCFM 6 oz.
Metal w/sight glass
Manual
40˚-160˚ F
250 psig 5 micron
7824
General purpose filters remove harmful water condensate, pipe scale, dirt and rust from your compressed air system. This prevents corrosive damage to compressed air equipment and finished products. Typically, general purpose filters are in- stalled upstream of regulators to prevent valve failure. They are also used as pre-filters to oil removing and coalescing filters to ensure high efficiency and long element life in applications such as paint spraying, instrumentation and pharmaceutical.
REGULATORS Model Number Pipe Size
Max. Flow SCFM
Adjustment Type
Pressure Gauge
Operating Temp. Range
Adjustment Range
Supply Pressure
Gauge Port
Price
ATD-7841 Mini w/Metal Body
$39.69
1/4” 25 SCFM Knob
0-160 psi
1/8” NPT
40˚-120˚ F 5-125 psig 250 psig
ATD-7843 ATD-7844
$68.69 $68.69
1/4” 50 SCFM Knob
0-160 psi
(2) 1/4” NPT 40˚-120˚ F 5-125 psig 250 psig
1/2” 100 SCFM Knob
0-160 psi
(2) 1/4” NPT 40˚-120˚ F 5-125 psig 250 psig
7841
Pneumatic equipment that operates at higher than recommended pressure can cause excess torque, force and wear. Operating below specified pressure can cause machines to fail to meet their design performance specifications. Therefore, precise air pressure control is essential to efficient operation of air powered equipment. An air line regulator is a specialized control valve which reduces upstream supply pressure level to a specified constant downstream pressure. Features three position non-rising knob - push to lock, pull to adjust, detach to make tamper resistant; regulates air pressure of the air line; self-relieving style units.
7887
7763
AIR CONTROL GAUGE
7888
• Accurate 0–160 psi • 1/4” NPT(M) air inlet; 1/4” NPT(F) air outlet • Adjusts pressure at the air tool • Fits most makes and models of spray guns and air tools • Ideal for spray guns to avoid costly painting errors such as poor color match, runs, poor coverage, orange peel, etc. ATD-6753. .................................................................... $18.59
7880
6753
PRESSURE GAUGE Model Number
7886
Pressure Range
Description/Features
Price
Inlet/ Outlet
Max. Flow
Outlet Pipe
Desiccant Charge
Number
Description
Price
ATD-7921 Pressure Gauge - 2” face, 1/4” center back mount
$14.79
0–160 psi
7921
FIVE-STAGE DESICCANT AIR DRYING SYSTEM
ATD-7763 ATD-77631
$699.95 $72.95
2 Quart, 5-Stage Desiccant Dryer
1/2”
30 SCFM 1/2”
2 Qt.
PIGGYBACK FILTER/REGULATOR COMBINATION UNITS
Replacement Filter Element Kit for ATD-7763
Specifications: • Pipe Size: 1/2” • Type: Standard • Max Flow SCFM: 100 • Filter Element: 40 micron • Pressure Gauge: Included • Bowl Capacity: 6 oz. • Bowl Type: Metal • Drain: Manual • Gauge: Included • Max Pressure: 250 psig
Specifications: • Pipe Size: 1/4” • Type: Standard • Max Flow SCFM: 50
The ATD-7763 unit is equipped with a filter, an oil removing filter, a two quart desiccant filter and a filter/regulator. Also includes a shut-off valve and two quarts of desiccant beads.
ATD-7888 ATD-78881
$699.95 $59.39
1 Gallon, 5-Stage Desiccant Dryer
1/2”
30 SCFM 1/2”
1 Gal.
Replacement Filter Element Kit for 7888
• Filter Element: 40 micron • Pressure Gauge: Included • Bowl Capacity: 6 oz. • Bowl Type: Metal • Drain: Manual • Gauge: Included • Max Pressure: 250 psig
The ATD-7888 unit is equipped with a filter, an oil removing filter, a one gallon desiccant filter and a filter/regulator. Also includes a shut-off valve and one gallon of desiccant beads.
Inlet/ Outlet
Max. Flow
Filter Element
Number
Description
Bowl Type
Price
TWO-STAGE DESICCANT AIR DRYING SYSTEM
.01 micron
Metal w/ sight glass
ATD-7880
$382.59
1 Quart, 2-Stage Desiccant Dryer with Oil Removing Filter
1/2”
250 psi
$146.39 ATD-7854
$143.99 ATD-7858
ATD-7886 ATD-7887
$23.59 $66.69
1 Quart Replacement Desiccant
1 Gallon Replacement Desiccant
7854
7858
Includes: 1 qt. desiccant filter, shut-off valve and 1 qt. desiccant beads
Made with FlippingBook flipbook maker