30 D
INDESTRUCTIBLE HANDLE HAMMERS
DEAD BLOW HAMMERS and RUBBER MALLETS Deliver a blow with minimum marring or surface damage ATD-4082 3-Pc. Dead Blow Hammer Set 8 oz., 1 lbs. and 2 lbs.
4082 (SET)
4020 (SET)
$47.69
ATD-4020 2-Pc. Rubber Mallet Set 16 oz. and 32 oz. mallets
$25.95
FIBERGLASS HANDLE HAMMER SETS Drop forged, polished steel heads that exceed ANSI specs
4035 (SET)
5-Pc. Miscellaneous Hammer Set 16 oz. Ball Pein, 32 oz. Ball Pein, 3 lbs. Sledge, 3 lbs. Cross Pein and 32 oz. Rubber Mallet 5-Pc. Ball Pein Hammer Set 8 oz., 12 oz., 16 oz., 24 oz. znd 32 oz. Ball Pein Hammers
ATD-4045
$112.69
ATD-4047 ATD-4048 ATD-4063 ATD-4064 ATD-4076 ATD-4078 ATD-4079
$47.09 $74.09 $50.49 $50.19 $102.99 $106.29 $96.79
32 oz. Ball Pein Hammer - 14” Handle
48 oz. Ball Pein Hammer - 14” Handle
ATD-4035
$87.09
2.5 lbs. Cross Pein Hammer - 16” Handle
4045 (SET)
4 lbs. Sledge Hammer - 12” Handle
32-PC. TRANSFER PUNCH SET
6 lbs. Sledge Hammer - 16” Handle
Features: Hardened tips; each piece marked with size; convenient roll pouch for storage CNT-3S301B................................................. $75.09
8 lbs. Sledge Hammer - 12” Handle
8 lbs. Sledge Hammer - 16” Handle
ATD-14033 B.A.M. Trio Includes 32 oz. (4047), 2.5 lbs. (4063), and 4 lbs. (4064)
$132.19
3-PC. X-LONG PIN PUNCH SET
3-PC. DEAD BLOW HAMMER SET • (1) 12 oz. Brass Hammer with brass non-sparking platted cap • (1) 1 lb. Ball Pein Hammer with steel plated cap • (1) 1/2 lb. Dead Blow Hammer • Shock absorbing steel shot filled canister for maximum force with reduced rebound TIT-63133................. $45.29
Four spring steel bars run all the way through the handle and are locked in the hammer head using steel locking plates. A special bonding process ensures that the head will never become dislodged from the handle. The ergonomic rubber grip handle absorbs vibration and reduces fatigue. *There are two spring steel bars in the ATD-4047 & ATD-4048 handles.
Cutaway showing steel bars and locking plates
$62.29 KAS-856-3ST
PUNCHES & CHISELS Forged chrome vanadium steel polished to a smooth finish and tempered for strength. All ATD punches and chisels are fully guaranteed against defective material and workmanship. Number Description
61044
729
• 16” length for increases access to hard-to-reach areas • Pin diameter sizes: 1/4”, 5/16” and 3/8” • High carbon molybendum tool steel with striker cap
Includes
Price
ATD-4075 ATD-759 ATD-761 ATD-762 ATD-760
$27.29 $28.19 $19.39 $22.19 $36.89
Pin: 1/4” x 4” and 3/8” x 6”; Drift: 1/2” x 8”
3-Pc. Non-Sparking Brass Punch Set
Long Tapers: 3/16”, 1/4” and 5/16”
3-Pc. Long Taper Punch Set
55114
21236
Pin: 1/8”, 5/32”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”
5-Pc. Pin Punch Set
Roll Punches : 1/8”, 5/32”, 3/16”, 1/4” and 5/16”
5-Pc. Roll Pin Punch Set
Pin: 1/8”, 3/16” and 1/4”; Solid: 1/4”; Center: 3/8”; Cold Chisels: 1/2”, 5/8” & 3/4”
8-Pc. Punch and Chisel Set
20836
55214
Pin: 3/16”x 3/8”x 6”, 1/8”x 3/8”x 5”, 3/32”x 3/8”x 5”and 1/4”x 1/2”x 6”; Center: 1/8”x 3/8” x 5”; Taper: 3/8” x 5/8” x 10”, 5/32” x 1/2” x 9”, 1/8” x 1/2” x 10” and 1/8” x 3/8” x 8-1/2”; Cold Chisels: 1/2”, 5/8”, 7/8” and 1” Pin: 3/32”, 1/8”, 5/32”, 3/16”1/4”and 5/16”; Starter: 1/8”, 5/32”, 3/16”, 1/4”and 5/16”; Cen- ter: 1/4”, 3/8” and 1/2”; Flat Chisels: 1/4”, 3/8”, 1/2”, 5/8”, 3/4” & 7/8” Pin: 3/32”–3/8”; Starter: 3/32”–5/16”; Cap Chisels: 1/4” and 5/16”; Center Punches: 1/4”–1/2”; Diamond Point Chisel: 5/16” and 3/8”; Half Round Nose Chisel: 5/16”; Flat Chisels: 1/4”–7/8” Center Punch 3/16-5mm x 5”; Cold Chisel 1/4-6mm x 5”; Cold Chisel 1/2-13mm x 6”; Cold Chisel 5/8-22mm x 6-1/2”; Cold Chisel 3/4-19mm x 7; Cold Chisel 3/8-10mm x 5-1/2”; Line- Up Punch 1/8-3mm” x 7 7/8”; Pin Punch 3/32” x 4-1/2”; Pin Punch 1/8” x 4-3/4”; Pin Punch 5/32” x 5”; Pin Punch 3/16” x 5-1/4”; Pin Punch 1/4” x 5-3/4”; Solid Punch 1/8” x 5”; Solid Punch 3/16” x 5”
ATD-714
$43.19
14-Pc. Punch and Chisel Set
ATD-720
$56.39
20-Pc. Punch and Chisel Set
55830
ATD-729
$74.79
29-Pc. Punch and Chisel Set
MYT-61044 14-Pc. Punch and Chisel Set
$103.89
11111
MYT-89021 Hammerless 3-Pc. Set
$34.95
Prick punch/ center punch tool, 3/16 pin punch/ hammer tool, and a cold chisel/ hammer tool
11109 (SET)
Number
Description
Length
Material
Face Dia.
Price
WLT-20836 WLT-21236 WLT-55214 WLT-55314 WLT-55416 WLT-55830
Call For Price Call For Price Call For Price Call For Price Call For Price Call For Price
8 lbs. BASH® Sledge Hammer
38”
Rubber/Steel
3”
12 lbs. BASH® Sledge Hammer
38”
Rubber/Steel
3”
• Roll spring (pin) punches have a pilot point that fits into the hollow center of the pin • Taper punches with self-centering nose that aligns holes for accurate assembly • Pin punches with reverse taper eliminates sticking in work piece • All punches and chisels are forged from high-carbon molybdenum tool steel, individually heat-treated and hardened the entire length with a tempered striking end for durability
32 oz. BASH® Dead Blow Hammer
14”
Rubber/Steel
1-3/4”
48 oz. BASH® Dead Blow Hammer
14”
Rubber/Steel
1-7/8”
64 oz. BASH® Dead Blow Hammer
16-1/2”
Rubber/Steel
2-1/4”
8 lbs. BASH® Dead Blow Hammer
31-1/2”
Rubber/Steel
2-5/8”
99800
99803
99802
B.A.S.H ® HAMMER KITS
Number
Description
Includes
Price
ATD-99800 ATD-99801 ATD-99802 ATD-99803 ATD-99804
$47.99 $30.29 $33.19 $84.79 $44.19
Long Tapers: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”
5-Pc. Long Taper Punch Set
Includes: 4 lbs., 12” BASH® Sledge Hammer, 32 oz., 14” BASH® Ball Pein Hammer and 2 lbs., 16” BASH® Cross Pein Hammer Includes: 2-1/2 lbs./12” and 4 lbs./12” BASH® Sledge Hammers; 1-1/2 lbs./14” and 2 lbs./14” BASH® Dead Blow Hammers; 2 lbs./16” BASH® Cross Pein Hammer and 1-1/2 lbs./14” BASH® Ball Pein Hammer
Call For Price
WLT-11111
3-Pc. BASH® Hammer Kit
Center Punch: 4-1/4”; Pin Punch: 1/16”, 5/64”, 3/32”, 1/8”; Solid Punch: 3/32”
6- Pc. Precision Punch Set
Chisel: 3/8”, 5/8”; Center: 5”; Pin: 3/16”; Solid: 3/16”
5-Pc. Punch and Chisel Set
Call For Price
Roll Punches: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”
12-Pc. Roll Spring (Pin) Punch Set
WLT-11109
6-Pc. BASH® Master Hammer Set
Roll Punches: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”
6-Pc. Roll Spring (Pin) Punch Set
Made with FlippingBook flipbook maker