53 D
• (5) adapters for 2- and 4-wheel disc brake assemblies of most cars • May be used on or off the car • Helps prevent damage to the piston and boot UNIVERSAL DISC BRAKE CALIPER TOOL LIS-25000............................... $95.99
DELUXE STEERING WHEEL REMOVER AND COLUMN SERVICE TOOL Includes: Steering wheel puller, special puller legs for steering wheels without threads, lock plate compressor tool to remove snap rings, pivot pin remover for GM, Chrysler and Ford tilt columns ATD-3059...........................................$111.69
BRAKE PISTON WIND BACK TOOL, 2 & 3 PIN LIS-29090...................................................$77.19 Includes an 11-1/2” long driver that allows bushings to be driven straight without removing the hub assembly. Double-sided cone snaps onto driver to drive out and install bushings. Use flanged end to install and tapered end to remove. Also removes truck leaf spring bushings. 2-PC. TRUCK ANCHOR PIN BUSHING DRIVER
AIR BRAKE SERVICE TOOL KIT • Removal tools for slack adjusters and push-rod clevis pins used on brake systems of class 7 and 8 vehicles • Works on manual and automatic slack adjusters • Includes 2 slack adjuster pullers and a brake clevis pin press ATD-5164. .............................................. $236.49
• Adapter will work on right or left hand rewind calipers • 2 Pin range is from 1/2” to 1-1/2” • 3 Pin range is from 1” to 1-11/16. Use with a 3/8” square drive
LIS-25200............................................................... $41.95
• For use on most domestic and import 2WD and 4WD vehicles • Use on front or rear disc brakes • Includes tools and adapters for both right- and left-handed threads • Use on main brakes and parking brake systems 18-PC. DISC BRAKE CALIPER TOOL SET ATD-5165. ................................................. $95.49
HEAVY-DUTY BEARING RACE AND SEAL DRIVER SET Fits most Class 8 over the road trucks and trailers, and some medium duty trucks. • Use the tapered driver side for bearing races and the flat side for seals. Includes (6) drivers and handle exten- sion for driving bearing races and seals on hubs with deep brake drums without removing the drums. • Range: 3-43/64” to 6”
SMALL BRAKE CALIPER PRESS
LIS-61900................................................................$278.69
• Works on small and medium single piston brake calipers found in subcompact to midsize cars with single piston calipers • ACME screw for durability • Size Range: .95” to 2.25” (compared to 1.5” to 3” on the Lang 279) KAS-277...................................... $64.59
FRONT WHEEL DRIVE BEARING ADAPTER KIT These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly intact on the vehicle, eliminating the need for front end alignment once the service work is done. • For front wheel drive cars and light trucks • Black oxide finish • Custom case for storage ATD-8625. ............................................................ $131.69
BRAKE CALIPER PRESS
$73.69 KAS-279
• Works on twin & quad piston fixed calipers,and single & twin piston float- ing calipers • Size Range: 1.5” to 3” • Made in USA
T.O.M.C.A.T. AIR ASSISTED CAMBER ADJUSTMENT TOOL
• 2’ air hose and air bladder
• Air control valve for inflating and controlled deflating
• (11) drivers to fit automobiles and trucks up to 1 Ton • Drivers can be used on bearing races and seals • Range: 1-1/2” to 4-1/2” • (2) handles, (1) for hammering and (1) for use with an air hammer MASTER PNEUMATIC BEARING RACE AND SEAL DRIVER SET LIS-12800....................................$158.69
• Safety relief valve to prevent overinflating • Weight: 2 lbs.
JDO-TC614.........................................................$239.95
11-PT. TRUCK BRAKE CALIPER SOCKET
$10.29 LIS-29120
• 11 Point Socket for Air Disc Brake Caliper Adjustment • Works on Bendix ADB 22X, ADB 225, SN6, SN7, SK7 air disc brake
BRAKE SPRING BAR
$34.29 LIS-40030
• Slip the hook into retaining spring loop and press down against the axle to remove spring. Lever action against the axle eliminates need for wrenches, pry bars and screwdrivers. Tool is 18” long with a molded handle for comfort. The tool has a black oxide finish.
10-PC. BEARING RACE AND SEAL DRIVER KIT
• Includes driver handle and (9) adapter sizes • Range: 1-1/2” to 3” • Easier to install bearing races and seals without damage to race, axle housing or brake rotors
BRAKE SPRING FORK
• The tip design cradles the return spring to keep it from sliding off. Heat treated material and extra-long shaft provides strength and stability. Ergonomic handle for comfort.
BENDIX/KNORR-BREMSE AIR DISC BRAKE PAD RETAINER TOOL • The only tool for servicing Bendix/Knorr-Bremse air disc brakes • A safer and easier way to remove pad retainer LIS-39770...........................$34.79
ATD-8622. ........................................................ $88.19
2-PC. AUTOMATIC SLACK ADJUSTER TOOL SET
2-PC. SEAL PULLER SET • Pin location affects the positioning of the tool
• Specifically designed for installation and servicing of Meritor air brake systems • 5/16” double-square head reversible wrench with built-in ratcheting mechanism is offset to provide increased clearance • Fork-end tool fits securely under the tensioner release button, allowing hands-free operation without prying or damaging it
• Works with left and right side calipers • Heat treated for strength and durability • Designed to work with or without caliper shield • Easy grip handle
• Greater surface area on hook prevents seal puller from ripping through the seal Set Includes: Small and large sized pullers for use with 3/8” breaker bar or ratchet; 2” and 4” pins for various diameter seals
LOC-891............ $52.49
$44.69 ATD-5166
KAS-850..................................................................$26.29
STEERING WHEEL LEVEL • Ideal for use with four-wheel laser aligners • Used to level the steering wheel during front-end alignment procedures • Self-retaining and centering using a spring loaded mechanism • Built in level bubble shows horizontal position • Suitable for steering wheels with an internal diameter between 10.5” and 13.4”
LANG SLACK ADJUSTERS
7578
8569
4651 (both tools)
KAS-4651 Rockwell/Arvin Meritor Slack Adjuster Release Tool & Wrench $ 59.99 KAS-8569 9/16” Bendix Slack Adjuster Wrench $48.49 KAS-7578 7/16” Haldex Slack Adjuster Wrench $ 32.09
ATD-3100......................$74.39
TRUCK WHEEL PAN
2-IN-1 S-CAM BRAKE TOOL
DISC BRAKE PISTON TOOL • Rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes • Will work on most import, Ford, Chrysler and some GM models CAUTION: DO NOT USE WITH POWER TOOLS
SPEEDY BRAKE PAD SPREADER
DUAL PISTON BRAKE CALIPER COMPRESSOR
Prevents oil mess during wheel repair. The pan fits rims with 13-3/4” ID and larger. Handle compartments hold hub nuts out of the oil. Made of polypropylene for durability. Will not warp if oil is warm.
Comprised of a steel shaft with a U-shaped fork on one end to stretch the retaining spring so that both halves of the brake shoe are held together, which enables the user to hook up the pin. An S-shaped device on the opposite end enables the user to position the brake shoes in a way that allows leverage for installation of the rollers. The hooked end pulls the brake shoes apart so that the rollers can be installed faster and more safely.
• Compresses brake piston in seconds making dual piston pad replacement an easy job
• Compresses brake pad in seconds making brake pad replacement an easy job
$10.99 ATD-5060
5163 top and side view shown
ATD-5163. ..................... $37.29
LIS-25750............ $65.99 LIS-24300............ $53.19
LIS-19852...................................$18.29
Made with FlippingBook flipbook maker