manufactured home. The masonry wall shall be constructed in accordance with the standards of the North Carolina Residential Building Code.
ii. Exterior Finish . The exterior of the manufactured home shall consist of one (1) or more of the following materials:
1. Vinyl or metal siding (the reflectivity does not exceed that of white paint).
2. Cedar or other wood siding.
3. Weather resistant pressboard siding.
4. Stucco siding, brick or stone siding (adhesive masonry or stone veneer).
iii. Roof Pitch . The pitch of the roof shall have a minimum vertical rise of three and one-half (3 ½) feet for each 12 feet of horizontal run. The roof shall be finished with a roof covering that meets the minimum standards of the Federal Housing Administration.
iv. Roof Projection . All roof structures shall provide an eave projection of a minimum of six (6) inches, which shall include a gutter.
v. Stairs & Porches . Stairs, porches, entrance platforms, ramps and other means of ingress and egress to and from the manufactured home, shall be installed or constructed in compliance with the standards of the North Carolina Building Code. Stairs shall only be used in conjunction with a porch or entrance platforms a minimum of 24 square feet in area. vi. Size of Manufactured Home . The size of the manufactured home in a manufactured home subdivision shall be compatible as the homes in the subdivision, such that the length and size of the manufactured home shall be no smaller than the average unit in the subdivision.
vii. Manufactured Home Replacement . Where a manufactured home, within the subdivision is replaced it shall also conform to the restrictive covenant requirements.
C. A Special Use Permit is required for operation in the Residential Agricultural (RA) Zoning District.
Made with FlippingBook interactive PDF creator