home subdivision or within an existing manufactured home park. Where an existing manufactured home on a single lot, not within a manufactured home subdivision or manufactured home park, was occupied at the time of adoption of the Land Development Ordinance (December 30, 2016), it may continue to be occupied and replaced with a new manufactured home of the same size and dimensions, or larger, as an improvement to the property.
B. Occupancy . A manufactured home shall be occupied as a single-family dwelling unit.
C. Dimensional Requirements . A manufactured home shall be a minimum of 24 feet in width (measured along the narrowest axis) and its length shall not exceed its width by three (3) times (measured along the longest axis, excluding towing apparatus, wheels, axles and transporting lights). D. Manufactured Home Site Set-Up or Dismantling . The set-up or dismantling of the manufactured home shall be consistent with all required permits from the Town’s Inspections Department. E. Existing Replacement of Manufactured Home . Other than subsection A above, a manufactured home that existed on a lot as of the effective date of the Land Development Ordinance, (December 30, 2016) shall be permitted to be relocated to another location on the same property provided that:
i. Jurisdiction . The property where the manufactured home is located is in the extraterritorial jurisdiction (ETJ).
ii. Zoning . The property where the existing manufactured home is currently located is zoned Residential Agricultural (RA) Zoning District.
iii. Acreage . The property contains a minimum of 25 contiguous acres and the manufactured home is proposed to be relocated on the same contiguous tract of land.
iv. Setback . The manufactured home is not located any closer than 50 feet from any property line.
(6)
Manufactured Home Park .
Made with FlippingBook interactive PDF creator