B. Setbacks . A lumber products and treatment facility shall be setback a minimum of 100 feet from any property line and 200 feet from any property line adjacent to a residential district. C. Outdoor Storage . On-site storage shall be limited to the side and rear yard areas and shall be screened from a public right-of-way and adjacent property by a Type A landscape buffer in accordance with Article O Landscaping & Tree Protection Standards.
D. Outdoor Storage Height Standard . The pile height of on-site outdoor storage materials shall be limited to 15 feet.
E. A Special Use Permit is required for operation in the Heavy Industrial (HI) Zoning District.
(6) Machine or Welding Shop . A machine or welding shop use shall be conducted within an enclosed structure, including storage of all materials, equipment, and finished products within the same enclosed structure as the use.
(7)
Manufacturing .
A. General Standards
i. Outdoor Storage Restricted . Outdoor storage is permitted in the side and rear yard of the facility, except where landscape buffer is required.
ii. Outdoor Storage Fenced . The outdoor storage area shall be enclosed by a fence a minimum of six (6) feet in height. The outdoor storage area of materials and fleet vehicles and equipment may be a gravel surface. iii. Parking Areas. All surfaces for employee and public parking and use shall be paved in accordance with the standards of the Land Development Ordinance, pursuant to Article N Parking, Loading & Lighting Design Standards. iv. Landscaping in Front Setback . One-half of the front building setback adjacent to the public right-of-way shall be developed only for landscaping and/or remain as an undisturbed natural area and shall not be used for any purpose except necessary ingress and egress driveways perpendicular to the public right- of-way and sidewalks.
Made with FlippingBook interactive PDF creator