Table – Minimum Lot Standards for Light Manufacturing District Min. Lot Area Lot Width Front Bldg. Setback Side Bldg. Setback
Rear Bldg. Setback
Lot** Coverage
Bldg. Height Max.
RLI
20,000 sq. ft. 100 feet 65 feet * indicates that the setback shall be doubled when abutting any residential zoning district, except where a use standard requires additional setback. ** indicates that the lot coverage includes all impervious surfaces (building, structures, parking, sidewalks, and any additional impervious surface. 20 feet 10 feet* 20 feet* 80% max.
(8)
Manufacturing, Artisan Products .
A. Within an Enclosed Structure . The manufacturing use shall be conducted within an enclosed structure including storage of all materials and equipment and finished products for sale within the same enclosed structure as the use.
B. Maximum Square Feet . The maximum area permitted for artisan manufacturing shall not exceed 2,500 square feet including any retail sales area.
C. Thoroughfare Access . The thoroughfare access requirement shall not apply for this use.
(9)
Wood Products & Commercial Chipping/Mulching .
A. Setback . A chipping or grinding machine shall be set back a minimum of 200 feet from any property line abutting residential zoning.
B. Outdoor Storage Requirements . Outdoor storage of material piles shall be set back a minimum of 75 feet from any property line and 150 feet from a property line abutting residential zoning or residential use. C. Property Owner Consent . If the chipping or grinding machine is being used in a clear- cutting operation, a notarized letter of approval from the owner of the property where the operation is conducted shall be submitted to the Town for approval, verifying the owner’s consent to u se the property for chipping and mulching. D. Commercial Operation s. If the chipping or grinding machine is being used as a commercial operation a plan identifying the location of all equipment, storage, structures associated with the commercial operation shall be submitted to the Town for review and approval to determine that the setbacks, landscaping and other standards are in place to comply with the Land Development Ordinance.
Made with FlippingBook interactive PDF creator