C. The final plat contains the following note for the lot: “This lot shall only be used for public or private utilities.”
D. The final plat contains the following note for the lot: “Buildings for permanent human occupancy shall not be permitted on this lot.”
E. Utility lots shall not be counted toward the total number of lots approved for the subdivision.
b. Flag Lots
(1) Flag Lots Prohibited . Flag lots are prohibited, except that one (1) flag lot may be considered as part of a preliminary major subdivision or minor subdivision in accordance with the following standards:
A. Consecutive Driveways Prohibited . Prohibits the creation of consecutive driveways along a minor thoroughfares or higher classification or collector streets.
B. Irregular Shaped Property . Allowed as a reasonable use in circumstances with irregular shaped property.
C. Topography or Environmental Constraints . Allowed as a reasonable use in circumstances with severe topography or environmental constraints or limited access.
(2) Flag Lot Driveway Access . A flag lot shall not be permitted that increases the number of driveway accesses onto a public thoroughfare or street. No driveway access for a flag lot shall be permitted on a thoroughfare classification of a major thoroughfare or higher in accordance with Article M Thoroughfare, Drainage & Utility Standards.
(3) Flag Lot Standards . A flag lot approved as a subdivision by the Town shall meet the following standards:
A. Maximum Access Length . The maximum length of the arm connecting the buildable portion of the flag lot to a public right-of-way shall not exceed 300 feet.
B. Minimum Buildable Lot Width . The minimum lot width shall be determined where the arm of the flag lot meets the buildable portion of the lot and shall be the minimum width for the district in which the flag lot is located.
Made with FlippingBook interactive PDF creator