determined. The sign base shall be designed to follow the slope of the grade where the sign and base are located.
Figure – Sign on a Slope
(4) Location. Freestanding signs shall comply with the setback and locational standards found elsewhere in this Article. Further, the following provisions may be provided:
A. Setback . Unless otherwise provided herein, no portion of a permanent freestanding sign shall be located less than three (3) feet from a public or private right-of-way.
B. Signs in Median . A ground or monolithic sign may be located in a median of a public driveway or right-of-way where the median and sign meet the following conditions:
i. Median Dimensions . The median shall be a minimum of 50 feet in length and a minimum of 10 feet in width.
ii. Sign Setback . The freestanding sign shall be located in the median no closer than 10 feet to either end of the median.
iii. Maximum Surface Area . The maximum freestanding sign surface area shall not exceed 24 square feet.
iv. Maximum Height . The maximum height of the freestanding sign shall be 42 inches.
(5) Material & Color. The freestanding sign structure shall be constructed of the same principal material and color as the principal structure or building for which the sign is provided.
Made with FlippingBook interactive PDF creator