b. Awning or Canopy Sign
An awning or canopy shall be attached to a frame that extends from the exterior façade wall of a building, without ground mounted support, using a fire retardant material such as fabric or vinyl and may contain signage in accordance with the follows: (1) Sign Surface Area . The maximum area of an awning or canopy sign shall not exceed 12% on the front and 10% per each side. It is not permitted to combine the percentages into one sign.
(2) Illumination. Awning or canopy signs may be illuminated only with direct surface lighting and not from any form of backlighting.
(3) Signs above Awning or Canopy . No signs shall be attached on or extend above the top of the awning or canopy, and all signs shall be mounted flat against the awning or canopy front face or side area.
Figure – Awning or Canopy
c. Band Sign
A band sign shall be attached and mounted flat on a building wall, must be located above the entrance to the principal use and shall meet the following standards:
(1) Sign Surface Area . The permitted band sign square footage is calculated using 3 square feet of sign surface area per one (1) linear foot of the building wall on which the sign is to be located.
(2) Maximum Height . The maximum vertical height of a band sign shall not exceed three (3) feet.
Made with FlippingBook interactive PDF creator