in any way with the required minimum five (5) feet clearance on the sidewalk or pedestrian travel way.
B. Materials. The sign surface shall be constructed of wood, metal, masonry material, painted signs and/or aluminum composite material (ACM). Use of plastic as the surface material is prohibited.
C. Monument Signs
i. Maximum Height . A monument sign shall have a maximum height of 42 inches.
ii. Sign Surface Area . The maximum surface area of a monument sign is 24 square feet per side.
iii. Support Base . Such sign shall have a continuous support base between 12 and 24 inches in height. The support base shall be constructed using all or some of the same material as the principal building façade on the same property.
D. Pole Signs
i. Maximum Height . A pole sign shall have a maximum height of seven (7) feet.
ii. Sign Surface Area . The maximum surface area of a pole sign is 16 square feet per side.
iii. Material & Color . The sign shall use a black round or square pole, either four (4) inches in diameter or four (4) inches square, with a decorative cap and projecting ornate ironwork from which the sign will hang.
(3)
Permanent Attached Sign Standards
A. Aggregate Sign Computation. The total square footage permitted for surface area of an attached sign is calculated as follows:
i. Building Wall Placement. The total aggregate surface area permitted for signage shall not exceed 12 percent (12%) of the surface area of the front building wall, and eight percent (8%) of total surface of a building wall when located on a side or rear building wall.
Made with FlippingBook interactive PDF creator