1. Wake County PIN number and address of each parcel of land that is part of the site plan
2. Zoning and required setbacks, if applicable
C. Existing Conditions Sheet . Provide a metes and bounds of the property proposed for site plan approval with existing conditions, including but not limited to, existing vegetation, existing environmental conditions, heritage trees (in accordance with Article I Environmental Protection Standards), existing utilities and size, existing thoroughfares adjacent to the property with right-of-way width and pavement section, and existing structures on site. i. Environmental Features. Identify all FEMA mapped floodplains, Wake County flood hazards soils, wetlands, and riparian buffers. Where the site plan development impacts environmental areas on the site, the property owner/developer shall obtain approvals and mitigate impacts in compliance with Article I Environmental Protection Standards. Such impacts may necessitate inclusion of environmental features on other required sheets.
D. Site Improvement Sheet . In addition to the metes and bounds of the property, the site improvement sheet shall include the following:
i. Property Ownership . Provide the ownership name and contact information of the proposed site plan, address phone number, and ownership of all adjoining property adjacent to the property in question for site plan approval.
ii. Use . Identify the uses for the proposed site plan.
iii. Building Information . Identify the location and building footprint of existing and/or proposed buildings including accessory structures. Identify the square footage and dimensions of all existing and/or proposed buildings or structures. iv. Parking. The site plan shall identify ingress and egress access, all parking areas, planned traffic circulation, loading and unloading areas, location of dumpsters, recycling, compactors and other accessory units and in accordance with Article N Parking, Loading & Lighting Design Standards as follows:
Made with FlippingBook interactive PDF creator