§9-3010 APPROVAL PROCESS
Lot and building plan approval for areas subject to a master plan approved under this Appendix shall be subject to the following requirements. See Part 9 Land Development Ordinance, Article Q Procedures & Administration for administrative requirements. a. Preliminary plat approval for subdivisions regulated by this Appendix requires approval by the Administrator (Planning Director), pursuant to other provisions of Part 9 Land Development Ordinance, Article Q Procedures & Administration. b. Following approval of the preliminary plat, construction drawings and final subdivision plats, and subsequent site plans where applicable, shall be submitted pursuant to Part 9 Land Development Ordinance, Article Q Procedures & Administration.
§9-3011 STREET & BLOCK STANDARDS
a. The street network shall be structured to define blocks with the following maximum block length:
(1) RMU 600 ft.
(2) CMU 800 ft.
(3) EMU
1000 ft.
b. Pedestrian Passage
Block faces exceeding 600 feet shall be subdivided with a pedestrian passage that is a minimum of 10 feet in width. Mid-block pedestrian roadway crossings shall be provided where block lengths over the maximum block length permitted are unavoidable or impractical. Crossings shall be clearly marked, paved, well lit, and possess direct sightlines to enhance pedestrian safety.
c. Rear access for all single-family residential lots shall be provided by a rear alley.
d. Block face length may be adjusted by up to 10% by administrative adjustment to accommodate specific site conditions. The applicant must provide written request, including reasoning for each of the findings provided below, in addition to the findings required for administrative adjustment approval elsewhere in the Land Development Ordinance. The Town Manager or designee must find the applicant has demonstrated
Made with FlippingBook interactive PDF creator