(1) The block size adjustment requested will not adversely affect the zoning district by impeding walkability.
e. Blocks adjacent environmentally sensitive or historic land or preexisting incomplete blocks may be exempt from block face length and block perimeter requirements by administrative adjustment, as per the requirements provided elsewhere in the Land Development Ordinance.
§9-3012 THOROUGHFARE NETWORK STANDARDS
Preliminary plats must follow standard submittal requirements:
a. The thoroughfare network plan must map thoroughfares and intersections according to §9-3011 Thoroughfare & Block Standards of this Appendix.
b. Thoroughfare cross-sections must be included for each mapped thoroughfare in accordance with this Appendix.
c. All thoroughfares must connect to other thoroughfares, forming a network, in accordance with the Town’s Community Transportation Plan. Internal thoroughfares shall connect wherever possible to those on adjacent sites. Cul-de-sacs shall be subject to approval only by administrative adjustment to accommodate specific site limitations such as steep slopes and wetlands, as per the requirements provided elsewhere in the Land Development Ordinance.
§9-3013 LOT STANDARDS
a. Within each form-based district, single family detached residential lots shall be platted to have the following minimum and maximum lot widths, measured at the frontage line (See Table – Residential Mixed-Use (RMU) Standards, Table – Commercial Mixed-Use (CMU) Standards and Table – Employment Mixed-Use (EMU) Standards). The maximums listed herein are applicable only to single-family detached residential uses proposed within the master plan.
(1) RMU 50 ft. min. - 150 ft. max.
(2) CMU 20 ft. min. - 96 ft. max.
(3) EMU
Not applicable
Made with FlippingBook interactive PDF creator