(7) Fences along private lot lines or alley lot lines may be coated green or black chain link.
(8) The supporting members and posts shall be on the inside, and the smooth or flat faces on the outside. If two (2) faces are used, each face shall be of the same type and finish. Board on board fences is considered equal treatment. (9) A minimum two (2) inch clearance from the bottom of fence to grade shall be provided, where applicable, to allow for unobstructed passage of water runoff. Not applicable to masonry or hedges but does apply to picket fences.
b. Specific to Residential Mixed-Use (RMU) Districts
(1) Frontage fences shall be picketed, post and hedge, hedgerows, iron, stone, or brick. See Table – Fence Types.
(2) Primary Frontage fences shall be three (3) to four (4) feet in height. Secondary frontage fences may be up to five (5) feet in height beginning at the side setback.
c. Specific to Commercial Mixed-Use (CMU) Districts
(1) Frontage fences shall be picket, post and hedge, iron, stone, brick or hedgerows. See Table – Fence Types.
(2) Frontage fences shall be three (3) to four (4) feet in height. Secondary frontage fences may be up to five (5) feet in height beginning at the side setback.
d. Specific to Employment Mixed-Use (EMU) Districts
(1) Frontage fences shall be iron, iron and stone, iron and brick, brick, stucco or stone. See Table – Fence Types.
(2) Frontage fences shall be four (4) to five (5) feet in height.
Made with FlippingBook interactive PDF creator