Components: Pump - Entirely stainless steel manufactured and fully self-draining, improving sanitation while increasing product life. Moves 1815 litres of water every minute! Motor - Specifically engineered to work at optimal performance levels according to your design. PS-200 Control Panel - Programmable logic controls (PLC) is capable of troubleshooting and custom configuration of Power Soak system. LED light indication when a water change is required. At set intervals, the water change feature disables the wash pump, allowing the user to empty the wash tank and refill before the pump will resume operation. A separate light reminds the user when a water change is recommended for the sanitise sink.
1.
2.
3.
8
4.
Rear Intake - Higher volume of wash water at a lower velocity, resulting in more efficient cleaning and elimination of pan migration.
5.
Jets - Sitting flush against the rear of the wash tank, Power Soak jets encourage free tumbling of ware for optimal washing performance.
6.
Hardware - Premium quality hardware – 90 degree, rear exit, ball-valve drain allowing enough space for most grease traps. Faucets and pre/rinse sprays are manufactured with O-ring seals and backflow preventers.
7.
Powered Utensil Basket - Removable basket, washing scoops, spatulas, and other tough-to-clean utensils with ease.
9
8.
Sensors - 3 sensors: one monitors water temperature and activates the heater when water drops below optimal temperature. High-water- level sensor ensures that the system has enough water to operate efficiently. Low-level sensor makes certain that the user drains the Power Soak when periodic water changes are required. Optional: Chemical Dispenser - The automatic, dual pump, dispensing system delivers liquid detergent and sanitiser into their respective sinks. The dispenser features an easy-to-use and accurate metering system for delivering the correct amount of detergent and sanitiser during each “fill” cycle of the wash and sanitiser sinks. AWI - The advanced wash insert (AWI) easily inserts into the wash tank, minimising both impact and noise while creating the most effective, efficient and consistent wash. PS-225 Control Panel - In addition to the PS-200 features, the PS-225 provides a visual update of the system’s status and critical tasks. Easy updates: single glance update of system status provided by a series of coloured alert lights cast on the floor. Quiet: the alert lights eliminate the need for another audible alarm in a busy operation. Simple: alert lights indicate when it is time to change the wash and sanitise tanks, and let operators know when tanks are filled and when it is time to load and unload items. Sectional Racking System - The sectional racking system allows you to partition your wash tank for speci c uses. Available in 153mm (2 slot), 305mm (6 slot), or 458mm (10 slot) configurations.
9.
Flexible Tank Divider
Flow Guide
Rib Section
Made with FlippingBook - Online Brochure Maker