Sinks
LIPPED EPOXY RESIN SINK Lipped sinks provide a streamlined look with the easiest, most cost-efficient installation. The weight-bearing lipped perimeter is set into a rabbeted opening in the work surface, thus eliminating the need for mechanical supports underneath the sink. Our ADA compliant lipped sink offers the same performance and easy installation standard lipped sinks. Exterior edges of the tub have been rounded to ensure the user’s safety and comfort. In addition, the plumbing outlets are located in the rear corner to assure easy access. ITEM # PRODUCT # A B DEPTH D E G H WT./LBS. ADA
100691
L3
12”
8”
6”
14.25” 10.25”
6”
4”
15
NO
100692
L5C
14”
10”
6”
16.25” 12.25”
7”
5”
23
NO
100693
L-ADA
14”
10”
5”
16.25” 12.25” 3.5”
3.5”
23
YES
100694
L10
16”
8”
7”
18.25” 10.25” 3.5”
4”
23
NO
100695
L10C
16”
8”
7”
18.25” 10.25”
8”
4”
24
NO
100696
L15C
16”
12”
8”
18.25” 14.25”
8”
6”
35
NO
D
A
100697
L20
16”
16”
7.5”
18.25” 18.25” 4.25” 4.25”
38
NO
B
100698
L25
18”
15”
8”
20.25” 17.25” 3.5”
3.5”
42
NO
G
100690
L-ADA25
18”
15”
5”
20.25” 17.25” 3.5”
3.5”
42
YES
H
100699
L30
18”
15”
11”
20.25” 17.25” 3.5”
3.5”
45
NO
100700
L50C
24”
16”
8”
26.25” 18.25” 12”
8”
59
NO
100701
L55
25”
15”
10”
27.25” 17.25” 3.5”
3.5”
60
NO
E
100702
L22C
18”
6.5”
6”
20.25” 8.75”
9”
3.25”
22
NO
END SINKS/WALL SINKS Molded with an integral splash designed for use as an end or wall sink with a solid backsplash and outlet on side. Trough cut-outs are available upon request, and manufactured per customer drawings.
OVERFLOWS Overflows are made of DURCON-R resin and are used to prevent water from overflowing the sink.
LIQUID HEIGHT
ITEM #
100737
4”
BACKSPLASH HEIGHT
SINK DEPTH
100736
6”
100831
17”
3-3/4” 5-1/2”
100735
8”
100832 18-3/4”
100734 10” 100733 Strainer Cap
100733
100831
STAINLESS STEEL DRIP TROUGHS Fabricated from #304 stainless steel with No. 4 finish, with integral outlet for connection to a drain hose (not included). Drip troughs are not provided unless specifically requested.
ITEM # DESCRIPTION 100749 24 “ Drip Trough 100750 30” Drip Trough 100751 36” Drip Trough 100752 48” Drip Trough
METERED HAND-WASHING SINKS Stainless steel hand-washing unit with easy-to-clean surface. Base: Cabinet constructed with 18-gauge stainless steel body and 4-gauge stainless steel top. Tank: 5-gallon fresh water and 7-gallon waste tanks; Requires no disassembly. Electric: Includes 15' GFCI power cord with standard wall plug (UL Listed) and powers 115-volt 3.3 GPM water diaphragm pressure pump (CSA Listed) at 45 PSI. Features: Stainless steel sink (10"W x 14"D x 5"H), water-saving, metered cold water faucet (0.5 GPM flow rate), refillable top-loading soap dispenser, towel dispenser and lockable door. Feet: 5" casters (two swivel and two locking).
ITEM #
PRODUCT
WATER HEATER OVERALL SIZE
COLD Water Sink & Metered Faucet HOT Water Sink & Metered Faucet COLD Water Sink & Sensored Faucet HOT Water Sink & Sensored Faucet
260004
No
24”W x 24”D x 39”H
260005
Yes
24”W x 24”D x 39”H
260006
No
24”W x 24”D x 39”H
Metered 26004
Sensored 26006
260007
Yes
24”W x 24”D x 39”H
59
DiversifiedCasework.com | info@DiversifiedCasework.com | 877.348.9663
Made with FlippingBook interactive PDF creator