144
Router
festoolusa.com | festoolcanada.com 145
OF 1010 Accessories Guide Stop Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Fine Adjustment Quick and precise adjustment when using router with Guide Stop or edging plate. Allows for 1/256” (1/10 mm) fine adjustment. Edge Guide Stable guidance for accurate grooves, flutes, dados, rabbets and more. Includes Guide Rods; does not include Dust Hood. Fine Adjuster Quick and precise adjustment when using router with Guide Stop or Edging Plate. Allows for 1/256” (1/10 mm) fine adjustment. (Edge Guide, not included) Chip Catcher Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency. Trammel Unit Rout circles and decorative curves up to 29-7/8” (760 mm) dia.
OF 1010 Accessories
US Link CA Link
Light module LM-OF 1010 R for retrofitting into the OF 1010 R (from production month 09/2021); including: light ring; battery unit with USB-C charging port
488752
US Link CA Link
578055
US Link CA Link
488754
Base For OF 1010; with retaining screws; with 20 mm dia. center hole
US Link CA Link
578057
US Link CA Link
578054
Table Widener cannot be used in combination with dust hood KSF-OF 1010; with retaining screws; the support extension on one side of the base runner prevents the router from tipping over Hole Drilling Set Includes LR 32 Guide Plate with mandrel (494 340), two side fences consisting of edge stop (485 758) and sliding stop flag (485 759). Packaged in a box. Guide Rail, clamps, and bits sold separately. Guide Plate Includes centering mandrel (492 187). Guide Rail, clamps, bits, and side fences sold separately. Edge Guide Set Guide Rails a specific distance from edge. Integrated ruler and adjustable stops. For use with the LR 32 system. Includes stop and sliding stop flag (485 759). Guide Rail Index Accurately place shelf pin holes and European hardware based on the 32 mm system using the stop to set the distance from the end. Also used to calibrate LR 32 rails to be joined together for taller workpieces. (2 pieces) Dowel Drill Bit - Brad-Point Brad-point style bit for stopped holes for shelf pins and hardware installation. Dowel Drill Bit - Spear-Point Spear-point bit for through holes for shelf pins or hardware installation. Euro-Hinge Boring Bit 35 mm Flat-bottom cutting bit for recessed cup-style hinges. 20mm Forstner Bit 20 mm Flat-bottom cutting bit for recessed cup-style hinges. Hole Drilling Set LR 32-SYS for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system. Highly efficient production of series of holes with 32 mm spacing.
US Link CA Link
578058
US Link CA Link
483358
US Link CA Link
493180
US Link CA Link
583290
US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link US Link CA Link
483922
US Link CA Link
494340
1/4” collet with nut
488761
Collet
8 mm collet with nut
488755
US Link CA Link
485758
10.8 mm OD / 9 mm ID
486029
24 mm OD / 21 mm ID
486031
US Link CA Link
496938
27 mm OD / 25 mm ID
486032
40 mm OD / 37 mm ID
486034
US Link CA Link
491066
Template
3/8“ OD / 1/4“ID
578721
NEW
1/2“OD / 3/8“ID
578722
NEW
US Link CA Link
491064
5/8“ OD / 1/2“ID
578723
NEW
US Link CA Link US Link CA Link
491077
NEW
3/4“OD / 5/8“ID
578724
NEW
1“OD / 7/8“ID
578725
491072
Centering Mandrel Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets. Router bit box Box-OF HW S8 Mix Storage container with ten different router bits. All bits have carbide tips and are suitable for wood.
492187
US Link CA Link
576799
US Link CA Link
498979
FS 1400/2 - LR32 Guide Rail; Length: 55” (1,400 mm)
US Link CA Link
Guide Rails for the LR 32 Hole Drilling System Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately.
496939
Accessory Kit includes: guide rail adapter; fine adjuster; support; centering mandrel; base; support; trammel unit; extraction hood for parallel side fence; chip catcher; Systainer SYS3 XXS 33; Systainer SYS3 M 187
Metric D17, D24, D27, D30, D40 copying rings
US Link CA Link
578046
FS 2424/2 - LR32 Guide Rail; Length: 95-13/32” (2,424 mm)
US Link CA Link
491622
Imperial D 3/8”, D ½”, D 5/8”, D ¾”, D 1” copying rings NEW
US Link CA Link
578047
Made with FlippingBook - Online catalogs