148
Router
festoolusa.com | festoolcanada.com 149
OF 1010 Accessories Guide Stop Adapt routers to Guide Rails for perfectly guided cuts. Slot in base engages rib on Guide Rail. Fine Adjustment Quick and precise adjustment when using router with Guide Stop (488 752) or edging plate. Allows for 1/256” (1/10 mm) fine adjustment. Edge Guide Stable guidance for accurate grooves, flutes, dados, rabbets and more. Includes Guide Rods (495 247); does not include Dust Hood (437 307). Fine Adjuster Quick and precise adjustment when using router with Guide Stop (488 752) or Edging Plate. Allows for 1/256” (1/10 mm) fine adjustment. (Edge Guide 578054, not included) Chip Catcher Swiveling Chip Catcher deflects chips and dust in edge-forming operations, further enhancing dust extraction efficiency.
OF 1010 Accessories Hole Drilling Set
USD $52.00 CAD $72.00
488752
Includes LR 32 Guide Plate with mandrel (494 340), two side fences consisting of edge stop (485 758) and sliding stop flag (485 759). Packaged in a box. Guide Rail, clamps, and bits sold separately. Guide Plate Includes centering mandrel (492 187). Guide Rail, clamps, bits, and side fences sold separately. Edge Guide Set Guide Rails a specific distance from edge. Integrated ruler and adjustable stops. For use with the LR 32 system. Includes stop and sliding stop flag (485 759). Guide Rail Index Accurately place shelf pin holes and European hardware based on the 32 mm system using the stop to set the distance from the end. Also used to calibrate LR 32 rails to be joined together for taller workpieces. (2 pieces) Dowel Drill Bit - Brad-Point Brad-point style bit for stopped holes for shelf pins and hardware installation. Dowel Drill Bit - Spear-Point Spear-point bit for through holes for shelf pins or hardware installation. Euro-Hinge Boring Bit 35 mm Flat-bottom cutting bit for recessed cup-style hinges. 20mm Forstner Bit 20 mm Flat-bottom cutting bit for recessed cup-style hinges. Hole Drilling Set LR 32-SYS for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system. Highly efficient production of series of holes with 32 mm spacing.
USD $299.00 CAD $435.00
583290
USD $35.00 CAD $48.00
488754
USD $155.00 CAD $219.00
494340
USD $69.00 CAD $90.00
578054
USD $86.00 CAD $125.00
485758
USD $35.00 CAD $48.00
483358
USD $35.00 CAD $48.00
496938
USD $29.00 CAD $41.00
493180
USD $39.00 CAD $47.00
491066
Trammel Unit Rout circles and decorative curves up to 29-7/8” (760 mm) dia.
USD $35.00 CAD $48.00
483922
USD $46.00 CAD $63.00
491064
USD $49.00 CAD $68.00 USD $49.00 CAD $68.00 USD $20.00 CAD $29.00 USD $20.00 CAD $29.00 USD $20.00 CAD $29.00 USD $20.00 CAD $29.00
1/4” collet with nut
488761
Collet
USD $99.00 CAD $139.00 USD $76.00 CAD $105.00
491077
8 mm collet with nut
488755
10.8 mm OD / 9 mm ID
486029
491072
24 mm OD / 21 mm ID
486031
USD $599.00 CAD $856.00
Template
576799
27 mm OD / 25 mm ID
486032
40 mm OD / 37 mm ID
486034
Centering Mandrel Center guide bushings and the LR 32 plate to the collet for accurate routing results. Works with 1/4” and 8 mm collets. Router bit box Box-OF HW S8 Mix Storage container with ten different router bits. All bits have carbide tips and are suitable for wood. Accessory Kit ZS-OF 1010 I including: guide rail adapter; fine adjuster; support; centering mandrel; copying ring D17; copying ring D24, D27, D30, D40; base; support; trammel unit; extraction hood for OF 1010 R parallel side fence; chip catcher; Systainer SYS3 XXS 33; Systainer SYS3 M 187 Light module LM-OF 1010 R for retrofitting into the OF 1010 R (from production month 09/2021); including: light ring; battery unit with USB-C charging port Base For OF 1010; with retaining screws; with 20 mm dia. center hole Table Widener cannot be used in combination with dust hood KSF-OF 1010; with retaining screws; the support extension on one side of the base runner prevents the router from tipping over
Guide Rails for the LR 32 Hole Drilling System
USD $34.00 CAD $46.00
492187
Guide Rail indexed with a series of holes for 32 mm spacing. Hole drilling set sold separately.
USD $299.00 CAD $399.00
498979
FS 1400/2 - LR32 Guide Rail Length: 55” (1,400 mm)
USD $165.00 CAD $229.00
496939
USD $315.00 CAD $425.00
578047
FS 2424/2 - LR32 Guide Rail Length: 95-13/32” (2,424 mm)
USD $429.00 CAD $595.00
491622
USD $39.00 CAD $53.00
578055
USD $21.00 CAD $28.00
578057
USD $30.00 CAD $41.00
578058
Made with FlippingBook - Online catalogs