35
45
Hot One Nozzles
Parts Detail
Riser Pad Supports manifold opposite nozzles. Prevents heat loss and maintains spacing between manifold and clamping plate.
INCLUDES (2) #10–24 LOW HEAD CAP SCREWS ITEM NUMBER X DIM. +.010
–.000 L DIM. F DIM. G DIA.
USED WITH
ERP0163 ERP0167 ERP0164 ERP0165 ERP0168 ERP0166
.250 .375 .750 .250 .375 .750
GATE-MATE 4, 250 SERIES AND 375 SERIES
4.000 3.250 .625
F 1.125
G DIA.
5.000 4.000 .781
625 SERIES
X
L
Center Support Pad Aligns and supports manifold center while minimizing heat transfer from manifold.
Spacer Ring Maintains spacing between manifold and nozzle plate.
.875 DIA.
P DIA.
X
FOR .250 DIA. DOWEL
X
A DIA.
ITEM NUMBER X DIM. +.010 –.000
+.010 –.000
A DIA.
USED WITH
ITEM NUMBER
X DIM.
P DIA.
ESR0157 ESR0158 ESR0159 ESR0160
.250 .750 .250 .750
ECB0161 ECB0162 ECB0163 ECB0164
.250 .750 .250 .750
2.500 2.500 1.500 1.500
GATE-MATE 4, 250 SERIES AND 375 SERIES
.406
.531
625 SERIES
Tapered Dowel Pin Aligns and prevents end plug from rotating. Tapered dowel pin must conform to ANSI B18.8.2-1978 standard.
.162 DIA.
.193 DIA.
ITEM NUMBER EDP0001
1.50
End Plug Used to plug horizontal flow channels.
End Plug Set Screw Used to secure end plug into manifold (2 required). End plug set screw must conform to the following standards. ANSI B1.1. ANSI B18.3 and ASTM F912.
Material : P–20
H DIA. +.0000 - .0002
THREAD
J DIA.
+.001 - .000 K
#10–24 TAP
N
M
SERIES
ITEM NUMBER H DIA. J DIA. K DIM. M DIM.
SERIES ITEM NUMBER THREAD N DIM. GATE-MATE 4 SSS7878 7 ⁄ 8 –14 UNF-3A .875 250 SSS3434 3 ⁄ 4 –16 UNF-3A .750 375 SSS7878 7 ⁄ 8 –14 UNF-3A .875 625 SSS11 1–12 UNF-3A 1.000 Heater Puller Machining Used for CHS-Series cartridge heaters recommended for heaters installed in blind holes.
GATE-MATE 4
EEP0002 EEP0001 EEP0002 EEP0003
.5615 .800 .4365 .675 .5615 .800
.750 1.500 .750 1.500 .750 1.500
250 375 625
.6875 .894 1.125 1.875
Heater Stop Machining Used for ECH-Series cartridge heaters.
HEATER HOLE
.406
. 201 DIA. HOLE × .625 DEEP 1/4–20 UNC TAP × .50 DEEP
.687 DIA. HOLE × .75 DEEP 3 / 4 − 16 UNF TAP × .68 DEEP
1/4–20 × .38 LG. BUTTON HEAD CAP SCREW MOLDMAKER TO SUPPLY
U.S. 800-626-6653 n Canada 800-387-6600 n dme.net n store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online