Gate-Mate ® Hot Sprue Bushings Jumbo Gate-Mate ®
76
The Jumbo Gate-Mate Bushing is designed for direct part gating in single cavity molds, eliminating the conventional cold sprue. The unique design of the bushing provides minimal gate vestige, without the objectionable witness lines so commonly found on direct gated parts. The bushing transfers molten plastics from the machine nozzle to the mold cavity via a direct channel in the body. The bushing, in conjunction with the recommended tip and gate configuration, controls gate vestige height. The Jumbo Gate-Mate Bushing utilizes an advanced design square coil heater and an independent thermocouple, strategically located for precise temperature control.
Bushing Assembly
BUSHING SUB-ASSEMBLY Bushing Sub-Assembly
BUSHING ASSEMBLY
2.625 DIA.
2.625 DIA.
BUSHING ASSEMBLY (INCLUDES GMT0004TIP) ITEM NUMBER A L SPH. RAD. GMB0008 2.500 3.562 1 / 2 & 3 / 4 GMB0009 3.500 4.562 BUSHING SUB-ASSEMBLY (ORDERTIP SEPARATELY) ITEM NUMBER A L SPH. RAD. GMB0113 2.500 3.562 1 / 2 & 3 / 4 GMB0114 3.500 4.562
.500
.500
1.062
1.062
.562
.562
L
L
A
A
.855
.855
.030 DIA. 1.2500 DIA.
1.2500 DIA.
Jumbo Gate-Mate ® Tips
TIP STYLE
ITEM NUMBER
TIP LENGTH
TIP DIA.
HOLE DIA.
THRU HOLE THRU HOLE WEAR RESISTANT
STANDARD WEAR RESISTANT
STANDARD GMT0004 WEAR RESISTANT GMT0406 THRU HOLE GMT0007
1.855 .030 N/A
-16 (typ.) 4 3
1.815 .140 .100
THRU HOLE WEAR RESISTANT
GMT0407
TIP LENGTH
NOTES: 1. Thru-hole tip designed .040 shorter in length to be a direct replacement for the standard tip; use a .080 to .125 diameter gate 2. Contact DME for tip recommendations and assistance with your application
TIP DIA. HOLE DIA.
TIP DIA.
U.S. 800-626-6653 n Canada 800-387-6600 n dme.net n store.dme.net
Made with FlippingBook - professional solution for displaying marketing and sales documents online