21”, 18”, 15” & 12” HIGH REFRIGERATOR WALL CABINETS
RW332124 RW362124
RW301824 RW331824 RW361824
RW301524 RW331524 RW361524
RW331224 RW361224
21 18 15 12
2 Doors w/o center mullion
• Wide stile and rail door styles are not available with FIMD option on cabinets less than 15” high • 12” High cabinets are not available with FIMD or MH
24
30, 33, 36
RW392124 RW422124
RW391824 RW421824 RW451824 RW481824
RW391524 RW421524
RW391224 RW421224 RW481224
2 Doors
21 18 15 12
• Cabinets 39” wide or wider will have a 2 1 /
2 ” wide center
support • Additional support recommended underneath wide cabinets • Wide stile and rail door styles are not available with FIMD option on cabinets less than 15” high • 12” High cabinets are not available with FIMD or MH
24
39, 42, 45, 48
Modification APC BO FH FI FIMD FME IC ID MD MH MW P RD RTK TKA VTK LUX • • s • • • • • • • • •
WALL BLIND CORNER CABINETS
WALL BLIND CORNER CABINET INSTALLATION/ORDERING INSTRUCTIONS Blind Corner cabinets with swing out kits should not be installed next to appliance cabinets due to clearance needed for kits. Must order left or right blind for all blind corner cabinets. For single door cabinets, hinge is on blind side of cabinet. Built in 8” Blind Overlay is 3 / 4 ” thick adding to the overall depth of the cabinet. All door styles must pull at least 2” and use a 2” filler when using hardware to allow for a 90° clearance. Blind side is a full panel. Fillers required but not included. Filler trims are also available.
*Min/Max Pull based on Square Door Edge Profile. Adjust as required for other Door Edges.
Hinge
Filler
*Min. Pull = 0" Max. Pull = 4 ¼"
Cabinet Width
Pull
Wall Cabinet
8" Blind Overlay Wall Blind Cabinet Wall
Wall Blind Corner Cabinet
F330
12 ¾" 12"
Filler
Filler Trim
Cabinet Door
Cabinet Width Door Width 24 27 11 ⅞ 30 14 ⅞ 33 17 ⅞ 36 20 ⅞ Wall Blind Corner (WBC) 8 ⅞
By
2–8
®
Made with FlippingBook Annual report maker