SNAP Projector

SNAP Projector (9BRPJ)


Enjoy your Sense-ational purchase with these directions Inspect the entire unit immediately after you take it out of the box. If there is any concealed damage, please contact us immediately at 877-509-7524 to report. You have 5 DAYS to report damage for replacement or refund.

16-1750 Plummer St Pickering, Ontario


PACKING LIST: Projector Base Projector Controls and Motor

2 Brass Connection Pegs Low Voltage Power Cord

Safety Precautions – the safety of your clients is dependent on the appropriate choice of activity to match yet challenge their physical abilities. Use appropriate spotting/safety techniques. In addition, the layout, installation, and maintenance of your equipment is critical. TFH equipment is not intended to be used without proper supervision. This sheet is for example only. It is not meant to, in any way, replace local, Provincial, or any applicable standards. Be aware – it is your responsibility to find all pertinent safety information that pertains to your facility.

Setting Up an Image Wheel

1. Select a Projection Image Wheel to be used. Attach the wheel to the Projector Controls and Motor unit via the magnetic circular attachment connection. 2. When using 6 ” diameter wheels, ensure the Silver Toggle Switches are on the top of the Motor Controls Unit, as in the image on this sheet. 3. When using 9 ” diameter wheels, ensure the Silver Toggle Switches are on the Bottom of the Motor Controls Unit. 4. Adjust the Focus of the image with the attached Black Lens by twisting and gently pulling into form.

Page 1 Page 2

Made with FlippingBook - professional solution for displaying marketing and sales documents online