If the Weld Station Aire unit is uncrated and upright, then the unit can still be moved with a fork lift truck. Place the forks under the unit portion of the main Weld Station unit. Card board or rubber padding can be placed on the forks to prevent scratching of the unit. Make sure the forks are on both side of the light(s) / cables to prevent damaging the lights. Do NOT place the forks under the lights. Do NOT let the forks enter the intake at the back of the booth area. The Weld
Station unit is top heavy and must be prevented from falling backwards during movement. It is recommended that the top of
the unit is bound to the mast of the fork lift truck during movement. This can be done by wrapping a strap around the unit and mast. Another method is to attach a chain or cable between the mast and the lifting lugs.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker