S TARTUP P ROCEDURES
The Weld Station Aire power must first be turned on by rotating the Power Disconnect / Emergency Shut Off switch to the 'ON' position. The unit can then be started by simply depressing the green button, on units with electrical panel; or simply by turning the rotary handle clockwise on units with MMP. The blower will start immediately. S HUTDOWN PROCEDURES To properly shutdown the Weld Station Aire, simply press the red button or turn the rotary handle counter-clockwise. The blower will not stop immediately, and may take a couple minutes to fully stop.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker