A PPENDIX D: W IRING D IAGRAMS (M ARCH 2018)
Notes concerning the wiring diagram:
Power is brought into the electrical box as 120 Volt AC single The overload may need to be reset. The Eaton overloads have an automatic reset function, which is turned off. If this has not been set, the overload will require being reset via the red button marked 'Reset'. Wire numbers have been added to the wiring diagram to aid in both the diagnostic issues as well as the maintenance and service issues while in the field. The wire numbers will be shown in small Black numbers at each end of the wire. The wires are be numbered by the 'node', meaning that several wires connecting into one point will have the same number. Labels are placed on the terminal blocks as well as the wires. Starting in December of 2009, Clean Air Industries switched over to LED lighting to reduce operating costs and provide a greener system. A Weld Station Aire may be equipped with one or two lights for each booth. A second light may be added after the Weld Station has been installed for additional lighting. Your Clean Air Industries sales representative can help in arranging this addition. Multiple electrical options / accessories are available for the Weld Station. If an electrical option has been added, then see the 'Weld Station Users Manual' for additional information.
sales@clean-air.com
clean-air.com
1-866-665-1829
Made with FlippingBook Online newsletter maker