GWO ARTR v2.1

ADVANCED RESCUE REFRESHER TRAINING STANDARD V02.1 ART-NR

2020-10-01_TSR_ARTR_V02.1

Demonstrate safe and correct use of personal fall protection equipment Demonstrate the ability to select and safely use both certified and structural anchor points Demonstrate the ability the take appropriate actions to avoid suspension trauma with the injured person Demonstrate how to reduce the risks associated with manual handling and apply further control measures where applicable

WORKING AT HEIGHT - SELF-EVACUATION

35 min. The aim of this lesson is to ensure the course participants are competent to perform a self- evacuation from an emergency hatch.

To successfully complete this lesson of the module each course participant must be able to:

1) Demonstrate how to perform a safe and controlled self-evacuation using standard wind industry evacuation equipment, from an emergency hatch. (L3 – Skill) 2) Demonstrate how to perform a safe and correct double evacuation with the evacuation or rescue device in an active mode setup including a connecting element between the device and the harness (L3 – Skill)

Note: 1 exercise per Course participant

SAFE AND CONTROLLED SELF EVACUATION

Each course participant shall:

Demonstrate as a group correct rigging and attachment of the evacuation device. Demonstrate how to apply fall protection at any point when there is a risk from falling from height. Demonstrate how to perform a passive mode setup self-rescue from an evacuation hatch Demonstrate how to perform an active mode setup double evacuation from an evacuation hatch, applying a deflection/friction carabiner on the rescue device and using a fall restraint lanyard kept as short as possible as a connecting element between the rescue / evacuation device and the harness Demonstrate how to reduce the risks associated with manual handling and apply further control measures where applicable

GLOBAL WIND ORGANISATION www.globalwindsafety.org

42 / 84

Made with FlippingBook flipbook maker