The last scanning data is recorded together with every fastening data Firmware Upgrade The last scanning data is recorded together with every fastening data.
1. Power off cotroller
Remove the SD card for data saving and use the new SD card for firmware update only.
2. Create the folder “ Update" if not present if not present.
3. Copy the firmware files to the Update Copy the firmware files to the Update folder.
4. Insert the SD card, and power ON the controller, then it is upda Insert the SD card, and power ON the controller, then it is updated automatically.
Power off, remove card and remove the bin files fro the update folder.
SD Memory card update ECT*.bin (ECT firmware file ) firmware file )
LCD*.bin (LCD firmware file ) LCD firmware file )
ECT* .bin
LCD* .bin
“update” folder
SD-CARD
Note: If controller is on and you remove SD card, the controller generates alarm sound.
SILICON VALLEY HEADQUARTERS 1080 North 11th Street, San Jose, CA 95112 | Phone: (408) 292 North 11th Street, San Jose, CA 95112 | Phone: (408) 292-2214 | Fax: (408) 292-2733 | mountztorque.com
52
Made with FlippingBook Annual report maker