ECX SPEED 13 M ∅ 13 mm, brushless, BLDC motor Sterilizable, ceramic bearings Key Data: 25/48 W, 4.9 mNm, 120 000 rpm
M 1:1
Motor Data Nominal voltage No load speed No load current Nominal speed Nominal torque
1_ 2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_
V
18 48 79000 79000 79000 75800 209 157 96 73.2 72500 72800 72800 69800 4.92 4.89 4.67 4.77 2.45 1.83 1.16 0.856 67.6 71 66.8 68 31.3 24.7 15.5 11.3 84.7 85 85.1 84.9 0.576 0.973 2.33 4.24 0.0207 0.0369 0.0829 0.16 2.16 2.88 4.32 6 4420 3310 2210 1590 1180 1120 1190 1120 1.6 1.52 1.62 1.53 0.13 0.13 0.13 0.13 20 2.5 1.69 313 -40…+135 155 120 000 0…0.28 1.5 24 36 Operating Range n [rpm] winding 36 V
rpm mA rpm mNm mNm A A
Nominal current (max. continuous current)
Stall torque Stall current Max. efficiency Terminal resistance Terminal inductance Torque constant Speed constant Speed/torque gradient Mechanical time constant
% Ω
10_ 11_ 12_ 13_ 14_ 15_ 16_ 17_ 18_ 19_ 20_ 21_ 22_ 23_ 24_ 25_ 26_ 27_ 28_ 29_ 30_ 31_ 32_
mH
mNm/A rpm/V rpm/mNm
ms gcm 2
Rotor inertia Thermal data
Sterilization information Sterilization cycles Sensorless: typical 2000 Hall sensors: typical 1000 Sterilization with steam Temperature Compression pressure up to
Thermal resistance housing-ambient Thermal resistance winding-housing Thermal time constant winding Thermal time constant motor Ambient temperature Max. winding temperature Mechanical data ball bearings Max. speed
K/W K/W
s s
°C °C
0 20000 40000 60000 80000 120000 100000
+134°C ±4°C
2.3 bar 100% 18 min.
rpm mm
Rel. humidity Cycle length
Axial play Preload Radial play Direction of force
N
Continuous operation Continuous operation with reduced thermal resistance R th2 50% Short term operation
pull
1.5 50 1500 6 [5] 1 3 32 46 [50 000] preloaded
Max. axial load (dynamic) Max. force for press fits (static) (static, shaft supported) Max. radial load [mm from flange]
N N N N
M [mNm]
0 1.5
3.5
5.5
7.5
Gear 381_GPX 13 SPEED Modular System
Motor Control 547_DEC Module 24/2 547_DEC Module 50/5 550_ESCON Module 24/2 551_ESCON 36/3 EC 551_ESCON Module 50/4 EC-S 551_ESCON Module 50/5 553_ESCON 50/5 561_EPOS4 Micro 24/5 562_EPOS4 Module 50/5 562_EPOS4 Module 24/1.5 563_EPOS4 Compact 24/5 3-axes 564_EPOS4 Compact 24/1.5 565_EPOS4 Compact 50/5 567_EPOS4 50/5 568_EPOS4 Disk 60/8 Details on catalog page 42
Other specifications Number of pole pairs Number of phases Weight of motor Typical noise level [rpm]
Sensor for motor type A: 511_ENX 13 EASY INT for motor type B: 511_ENX 13 EASY INT Abs.
Stages [opt.]
1–3
g
dBA
Connection A and B, motor (Cable AWG A: 26, B: 22) red Motor winding 1
black Motor winding 2 white Motor winding 3 Connection A, sensors (Cable AWG 28) orange V cc 5 ±0.5 V blue GND
Configuration
Flange front: thread holes/center thread Flange back: metal ring/external thread Shaft front: length/diameter Electric connection: cable length/pin connection Appropriate connectors and connecting cables are available for the configuration of the pin connection together with the external thread: see catalog, Accessories section.
yellow Hall sensor 1 brown Hall sensor 2 grey Hall sensor 3
Output signals: CMOS compatible push-pull stage. No pull-up resistor required. Hall signals are generated by an EASY INT sensor. In combination with the ENX EASY INT, the orange (V CC ) and blue (GND) connections are not used.
maxon EC motor 201
© 2024 maxon. All rights reserved. August edition. Subject to change.
Made with FlippingBook Publishing Software