IDX 70 L 70 mm, brushless, BLDC motor IP65 motor with industrial housing Key Data: 900/954 W, 3750 mNm, 3000 rpm
M 1:2½
Motor Data Nominal voltage No load speed No load current Nominal speed Nominal torque
1_ 2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_
V
48
60
rpm mA rpm mNm mNm A A
2780 771 2430 3750
3070 712 2710 3360
Nominal current (max. continuous current)
21.3 17.1 25800 25400 669 592 93.2 93.1 0.0718 0.101 0.221 0.287 164 186 58.2 51.4 0.0254 0.028 0.408 0.449 1530 1530 1.21
Stall torque Stall current Max. efficiency Terminal resistance Terminal inductance Torque constant Speed constant Speed/torque gradient Mechanical time constant
% Ω
10_ 11_ 12_ 13_ 14_ 15_ 16_ 17_ 18_ 19_ 20_ 21_ 22_ 23_ 24_ 25_ 26_ 27_ 28_ 29_ 30_ 31_ 32_
mH
mNm/A rpm/V rpm/mNm
ms gcm 2
Rotor inertia Thermal data
Operating Range n [rpm] winding 48 V
Thermal resistance housing-ambient Thermal resistance winding-housing Thermal time constant winding Thermal time constant motor Ambient temperature Max. winding temperature Mechanical data ball bearings Max. speed
K/W K/W
0.28 46.8 1820 -40…+100 155 3200 0.22 28 preloaded 22 270 300 [15] 8 3 2995 65 [3000] pull
s s
°C °C
rpm mm
Axial play Preload Radial play Direction of force
0 0 1000 1000 2000 3000
N
Continuous operation Continuous operation with reduced thermal resistance R th2 50% Short term operation
Max. axial load (dynamic) Max. force for press fits (static) (static, shaft supported) Max. radial load [mm from flange] Other specifications Number of pole pairs Number of phases Weight of motor Typical noise level [rpm] Protection class without shaft
N N N N
M [mNm]
3000 5000
Modular System
Motor Control 557_ESCON2 Module 60/30 557_ESCON2 Compact 60/30 563_EPOS4 Module 50/15 566-567_EPOS4 Compact 50/15 567_EPOS4 70/15 Details on catalog page 42
Gear 464_GB 9 465_GB 65
Sensor 515_ENX 22 EASY INT 516_ENX 22 EMT INT
Stages [opt.]
1 2
g
dBA
IP65
Accessories 591_Brake AB 60 S
Power Connection (M23, male, 6 poles, N-coded) Pin 1 Motor winding 1 Pin 2 Motor winding 3 Pin 3 FE Pin 4 U brake + (optional) Pin 5 U brake GND (optional) Pin 6 Motor winding 2 Sensor Connection (M12, male, 17 poles, A-coded) Pin 1 GND Pin 10 B Pin 2 NTC Pin 11 DATA/ Pin 3 V CC 4.75...26 V Pin 12 DATA Pin 4 A Pin 13 CLK Pin 5 I/ Pin 14 CLK/ Pin 6 A/ Pin 15 Hall Sensor 3 Pin 7 B/ Pin 16 Hall Sensor 1 Pin 8 I Pin 17 Hall Sensor 2 Pin 9 NTC NTC resistor 25°C: 10 kOhm ±1%, beta (25–100°C): 3460 K Compatible cables available online in the configurator
Configuration
Flange front: A-Flange/C-Flange Encoder Interface: SSI/BiSS-C Angle Power Connector: 0°/90° Shaft: Standard with feather key/small diameter without feather key
250 maxon EC motor
© 2024 maxon. All rights reserved. September edition. Provisional data. Subject to change.
Made with FlippingBook Publishing Software