EC-max 30 ∅ 30 mm, brushless, 60 watt
M 1:2
Stock program Standard program Special program (on request)
Part Numbers
272763
272765
272762
272764
Motor Data
Values at nominal voltage 1 Nominal voltage 2 No load speed 3 No load current 4 Nominal speed 5 Nominal torque
12
24
36
48
V
7980 302 6590 63.6 4.72 381 26.8 80 0.447 0.049 14.2 672 21.2 4.86 21.9
9340 191 8040 60.7 2.66 458 18.8 81 1.27 0.143 24.3 393 20.6 4.73 21.9
9490 130 8270 63.7 1.88 522 14.5 82 2.48 0.312 35.9 266 18.4 4.21 21.9
9350 95.4 8130 64.1 1.4 519 10.7 82 4.49 0.573 48.6 197 18.2 4.17 21.9
rpm mA rpm mNm mNm A A
6 Nominal current (max. continuous current)
7 Stall torque 8 Stall current 9 Max. efficiency
%
Characteristics 10 Terminal resistance phase to phase 11 Terminal inductance phase to phase
Ω
mH
12 Torque constant 13 Speed constant 14 Speed/torque gradient 15 Mechanical time constant
mNm/A rpm/V rpm/mNm
ms gcm2
16 Rotor inertia
Specifications
Operating Range
Comments
Thermal data 17 Thermal resistance housing-ambient 18 Thermal resistance winding-housing
n [rpm]
Continuous operation In observation of above listed thermal resistance (lines 17 and 18) and an ambient temperature of 25°C, the maximum permissible winding temperature will be reached during continuous operation = thermal limit. Short term operation The motor may be briefly overloaded (recurring). Assigned power rating
7.4 K/W 0.5 K/W 2.76 s 1000 s +155°C -40…+100°C 0 mm 15 000 rpm 0.14 mm preloaded
60 W
19 Thermal time constant winding 20 Thermal time constant motor 21 Ambient temperature 22 Max. winding temperature Mechanical data (preloaded ball bearings) 23 Max. speed
15000
272763
10000
5000
24 Axial play at axial load 25 Radial play
< 6.0 N > 6.0 N
26 Max. axial load (dynamic) 27 Max. force for press fits (static) (static, shaft supported) 28 Max. radial load, 5 mm from flange Other specifications 29 Number of pole pairs 30 Number of phases 31 Weight of motor
5 N 98 N 1300 N 25 N
M [mNm] I [A]
20 40 60
1.0
2.0
3.0
Gear 441_GP 32 A 444_GP 32 C 447_GP 32 HP 450_KD 32 453_GP 42 C 478–486_GP 32 S Modular System
Details on catalog page 50
1 3
Sensor 505_ENX 16 EASY 506_ENX 16 EASY XT 507_ENX 16 EASY Absolute 508_ENX 16 EASY Absolute XT 539_Encoder HEDL 5540
Motor Control 547 DEC Module 50/5 551 ESCON 36/3 EC 551 ESCON Module 50/4 EC-S 551 ESCON Module 50/5 553 ESCON 50/5 561 EPOS4 Micro 24/5 562 EPOS4 Module 50/5 563 EPOS4 Compact 24/5 3-axes 565 EPOS4 Compact 50/5 567 EPOS4 50/5
305 g
Values listed in the table are nominal. Connection motor (Cable AWG 20) red Motor winding 1 Pin 1 black Motor winding 2 Pin 2 white Motor winding 3 Pin 3 N.C. Pin 4 Connector Part number Molex 39-01-2040 Connection sensors (Cable AWG 26) yellow Hall sensor 1 Pin 1 brown Hall sensor 2 Pin 2 grey Hall sensor 3 Pin 3 blue GND Pin 4 green V Hall 3…24 VDC Pin 5 N.C. Pin 6 Connector Part number Molex 430-25-0600 Wiring diagram for Hall sensors see p. 65
Accessories 582_Brake AB 20
568 EPOS4 Disk 60/8 569 EPOS4 Disk 60/12
maxon EC motor 281
© 2024 maxon. All rights reserved. September edition. Subject to change.
Made with FlippingBook Publishing Software