RE 50 ∅ 50 mm, graphite brushes, 200 watt
M 1:2
Stock program Standard program Special program (on request)
Part numbers
578296 578297 578298 578299 618570 618571 618572 618573
Industrial Version IP54*
Motor data
Values at nominal voltage 1 Nominal voltage 2 No load speed 3 No load current 4 Nominal speed 5 Nominal torque 7 Stall torque 8 Stall current 9 Max. efficiency Characteristics 10 Terminal resistance 11 Terminal inductance 12 Torque constant 13 Speed constant 14 Speed / torque gradient 15 Mechanical time constant
24 70 5950 5680 4900 2760 236 147 88.4 27.4 5680 5420 4620 2470 405 418 420 452 10.8 7.07 4.58 1.89 8920 8920 7370 4340 232 148 78.9 17.9 94 94 94 92 0.103 0.244 0.608 3.9 36 48 0.072 0.177 0.423 2.83 38.5 60.4 93.4 242 248 158 102 39.5 0.668 0.638 0.666 0.638 3.75 3.74 3.78 3.74 536 560 542 560
V
rpm mA rpm mNm mNm A A
6 Nominal current (max. continuous current)
%
Ω
mH
mNm/A rpm/V rpm/mNm
ms gcm 2
16 Rotor inertia
Specifications
Operating range
Comments
Thermal data 17 Thermal resistance housing-ambient 18 Thermal resistance winding-housing
n [rpm]
Continuous operation In observation of above listed thermal resistance (lines 17 and 18) the maximum permissible winding temperature will be reached during continuous operation at 25°C ambient. = Thermal limit. Short term operation The motor may be briefly overloaded (recurring). Assigned power rating
3.8 K/W 1.2 K/W 71.7 s 1370 s
200 W
19 Thermal time constant winding 20 Thermal time constant motor 21 Ambient temperature 22 Max. winding temperature Mechanical data (preloaded ball bearings) 23 Max. speed 24 Axial play at axial load 25 Radial play
578297
-30…+100°C +125°C
8000 2000 4000 6000
< 11.5 N 0 mm > 11.5 N 0.1 mm 9500 rpm
30 N 150 N 6000 N 110 N preloaded
300
150
450
M [mNm] I [A]
26 Max. axial load (dynamic) 27 Max. force for press fits (static) (static, shaft supported) 28 Max. radial load, 15 mm from flange Other specifications 29 Number of pole pairs 30 Number of commutator segments 31 Weight of motor
2.5
5.0 7.5 10.0
386_GP 52 C Gearheads Modular system
Details on catalog page 64
Sensors 433_Encoder HEDL 5540 Industrial version IP54* 434_Encoder HEDL 9140 480_Brake AB 44
447_ESCON2 Micro 60/5 448_ESCON2 Module 60/12 449_ESCON2 Compact 60/5 449_ESCON2 Compact 60/12 450_ESCON2 60/12 455_EPOS4 Module 50/5 455_EPOS4 Module 50/8 456_EPOS4 Module 50/15 458_EPOS4 Compact 50/5 459_EPOS4 Compact 50/8 CAN 460_EPOS4 Compact 50/15 Control Electronics
1
15
1100 g
Values listed in the table are nominal. Explanation of the figures on page 264. * Industrial version with radial shaft seal ring (resulting in increased no load current). IP54 protection only if mounted on brush side, in compliance with maxon modular system.
461_EPOS4 50/5 462_EPOS4 70/15 463_EPOS4 Disk 60/8 463_EPOS4 Disk 60/12
maxon 291
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software