IDX 70 S 70 mm, with integrated electronics IP65 Drive with Positioning/Speed Controller Key Data: 550/641 W, 1530 mNm, 6000 rpm
M 1:3
Drive data (provisional) Nominal power supply voltage Nominal speed Nominal torque at 25°C Nominal torque at 40°C Nominal supply current at 25°C Nominal supply current at 40°C Maximum speed at nominal voltage Maximum permissible drive speed Maximum torque (short-time) Maximum supply current (short-time) Rotor inertia of the drive Nominal supply voltage + V CC Mechanical time constant Thermal resistance housing-ambient Thermal resistance winding-housing Thermal time constant winding Thermal time constant drive Ambient temperature Thermal data
V
1_ 2_ 3_ 4_ 5_ 6_ 7_ 8_ 9_
24
48
60
rpm mNm mNm rpm rpm mNm A A
3870 1069 928 19.7 17.1 4100 6000 2208 46 568
3800 1339 1163 12.1 10.5 4100 5125 4416 46 568
4000 1530 1329 11.6 10.1 4280 4280 5290
10_ 11_ 12_ 13_ 14_ 15_ 16_ 17_ 18_
46
A V
568 12…60 12…60 12…60 0.598 0.543 0.569
gcm²
ms
Operating Range n [rpm] 48-V-system
K/W K/W
1.76 1.07
550 W
s s
9.83 1260 -30…+85
6000 4000 3500 3000 2500 2000 1500 1000 500 0
°C
Mechanical data Axial play Direction of force Radial play Preload
mm
19_
0.22 28 Pull
N
22 270 300 [15] preloaded
20_ 21_ 22_ 23_
M [mNm]
0
1000 2000 3000 4000
Max. axial load (dynamic) Max. force for press fits (static) Max. radial load [mm from flange]
N N N
n [rpm] 60-V-system
550 W
4500 4000 3500 3000 2500 2000 1500 1000 500 0
Other specifications Weight of the drive Typical noise level [rpm]
g
24_ 25_
1800 55 [3000]
dBA
Continuous operation Continuous operation with reduced thermal resistance R th2 50% Short term operation
Sensor ENC single-turn absolute encoder: resolution, bits EMT multi-turn absolute encoder: resolution, bits Multi-turn: max. no. of turns Supply
12
1000 2000 3000 4000 M [mNm]
0
Gear 412_GPX 70 A/UP 413_GPX 70 LN Modular System
Details on catalog page 42
14 65 536
Motor Control integrated
Stages [opt.]
Sensor integrated ENC integrated EMT Accessories 591_Brake AB 60 S
1–2 1–2
M23, male, 6 poles, N-coded M12, male, 12 poles, A-coded M8, male, 5 poles, B-coded M8, female, 5 poles, B-coded M8, female, 4 poles, A-coded M8, female, 4 poles, A-coded
1 1 2
463_GB 12 464_GB 9 465_GB 65
I/O‘s
CANopen Input CANopen Output EtherCAT Input EtherCAT Output
Compatible cables available online in the configurator.
Configuration Configuration
Flange front: A-Flange / C-Flange Interface with Positioning / Speed Controller: CANopen / EtherCAT Interface with Speed Controller: I/O Angle Power Connector: 0° / 90° Shaft: Standard with feather key/small diameter without feather key
364 maxon compact drive
© 2024 maxon. All rights reserved. July edition. Subject to change.
Made with FlippingBook Publishing Software