GPX 52 ∅ 52 mm, planetary gearhead
M 1:2
Key data
A Standard version
UP Ultra performance
Max. transmittable power Max. continuous torque Max. continuous input speed Ambient temperature Bearing at output
W
400 30.0 6000
600 45.0 6000
Nm rpm °C
-40…+100 Ball bearing
-40…+100 Ball bearing
Operating range (output shaft)
A Standard version
UP Ultra performance
n [rpm]
n [rpm]
Continuous operation Intermittent operation
10000
1000
1 stage
stage
100
2 stages
2 stages
3 stages
3 stages
10
1
.
M [Nm]
1
0.1
10
100 M [Nm]
Specifications
A Standard version
UP Ultra performance
1
2
3
1
2
3
Number of stages Max. transmittable power (continuous) Max. transmittable power (intermittent) Max. continuous torque Max. intermittent torque Max. continuous input speed Max. intermittent input speed Average backlash no load Max. efficiency Max. axial load (dynamic) Max. permissible radial load, 10 mm from flange
400 500 5.0 7.0 6000 7500 95 0.5 200 420 59.5 545
200 250 15.0 23.0 6000 7500 92 0.6 200 630 76.6 713
100 125 30.0 45.0 6000 7500 89 0.8 200 900 93.9 930
600 750 7.5 10.5 6000 7500 95 0.3 200 420 59.5 552
300 375 22.5 34.5 6000 7500 92 0.4 200 630 76.6 719
150 188 45.0 67.5 6000 7500 89 0.5 200 900 93.9 926
W W
Nm Nm rpm rpm
%
°
N N
Gearhead length L1¹
mm
Weight
g
Configuration Number of stages Reduction
A Standard version
1 3.9, 5.3, 6.6 16, 21, 26, 28, 35, 44 UP Ultra performance 2
1
2
3
3
3.9, 5.3, 6.6 16, 21, 26, 28, 35, 44
62, 83, 103, 111, 138, 172
62, 83, 103, 111, 138, 172
Version Flange Shaft
Standard/noise reduced/ultra performance
Standard flange
Length/diameter/feather key
Modular system Servo Motors
Page
№ of stages [opt.]
IDX 56 S IE IDX 56 M IE IDX 56 L IE IDX 56 S IDX 56 M IDX 56 L
1–3 1–3 1–3 1–3 1–3 1–3
109 110 111 119 120 121
¹This length may vary depending on the configuration and choice of motor. The effective length is calculated at the end of the configuration process.
maxon 367
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software