GPX 70 ∅ 70 mm, planetary gearhead
Stufe/stage: 1 + 2
M 1:4 Key data
A Standard version
UP Ultra performance
Max. transmittable power Max. continuous torque Max. continuous input speed Ambient temperature Bearing at output
W
850 30.0 4000
1200 70.0 4000
Nm rpm °C
-20…+100 Ball bearing
-20…+100 Ball bearing
A Standard version
Operating range (output shaft)
UP Ultra performance
n [rpm]
n [rpm]
Continuous operation Intermittent operation
10000
10000
1000
1000
1 stage
1 stage
2 stages
2 stages
100
100
10
10
1
1
1
1
0.1
10
100 M [Nm]
0.1
10
100 M [Nm]
Specifications
A Standard version
UP Ultra performance
1
2
1
2
Number of stages
850 1063 10.0 12.5 4000 6000 95 0.5 825 1000 58.5 993
600 750 30.0 37.5 4000 6000 92 0.5 825 1200 80.4 1399
1200 1500 15.0 18.8 4000 6000 95 0.5 825 1000 58.5 1001
1050 1313 70.0 87.5 4000 6000 92 0.5 825 1200 80.4 1425
Max. transmittable power (continuous) Max. transmittable power (intermittent) Max. continuous torque Max. intermittent torque Max. continuous input speed Max. intermittent input speed Average backlash no load Max. efficiency Max. axial load (dynamic) Max. permissible radial load, 10 mm from flange
W W
Nm Nm rpm rpm
%
°
N N
Gearhead length L1¹
mm
Weight
g
Configuration Number of stages Reduction
A Standard version
UP Ultra performance
1
2
1
2
3.9, 5.3, 6.6 16, 21, 26, 28, 35, 44
3.9, 5.3, 6.6 16, 21, 26, 28, 35, 44
Version Flange
Standard/noise reduced/ultra performance
Standard flange
IDX 70 S IE IDX 70 M IE IDX 70 S Safe IDX 70 M Safe Shaft Modular system Servo Motors
Page
209 Page
BLDC Motors
№ of stages [opt.]
№ of stages [opt.]
1–2 1–2 1–2 1–2 1–2 1–2
112 113 115 116 122 123
EC-i 70
1–4
IDX 70 S IDX 70 M
¹This length may vary depending on the configuration and choice of motor. The effective length is calculated at the end of the configuration process.
maxon 371
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software