Planetary Gearhead GP 10 A ∅ 10 mm, 0.01–0.15 Nm
Technical data Planetary Gearhead Output shaft Bearing at output
straight teeth stainless steel max. 0.08 mm max. 0.04 mm 0 mm
preloaded ball bearings
Radial play, 5 mm from flange
Axial play at axial load Max. axial load (dynamic) Max. force for press fits
< 2 N > 2 N
5 N 10 N
Direction of rotation, drive to output Max. continuous input speed Recommended temperature range
=
12 000 rpm -40…+80°C
Number of stages 1 Max. radial load, 5 mm from flange
2
3
4
5
5 N 10 N 15 N 20 N 25 N
M 2:1
Part numbers
Stock program Standard program Special program (on request)
218415 218416 218417 218418 218419 4 : 1 16 : 1 64 : 1 256 : 1 1024 : 1 4 16 64 256 1024 1.2 1.2 1.2 1.2 1.2 1 2 3 4 5 0.010 0.030 0.100 0.150 0.150 0.020 0.050 0.150 0.200 0.200 90 81 73 65 59 6.7 7.2 7.7 8.2 8.7 1.5 1.8 2.0 2.2 2.5 0.005 0.005 0.005 0.005 0.005 10.4 14.1 17.2 20.4 23.5
Gearhead data 1 Reduction 2 Absolute reduction 3 Max. motor shaft diameter 4 Number of stages 5 Max. continuous torque
mm Nm Nm
6 Max. intermittent torque at gear output
7 Max. efficiency 8 Weight
% g
9 Average backlash no load 10 Mass inertia 11 Gearhead length L1
°
gcm 2 mm
overall length
overall length
Modular system + Motor
+ Sensor/Brake Page
Overall length [mm] = Motor length + gearhead length + (sensor/brake) + assembly parts
Page
RE 10, 0.75 W 131/132
27.5 31.2 34.3 37.5 40.6 35.6 39.3 42.4 45.6 48.7 33.3 37.0 40.1 43.3 46.4 33.3 37.0 40.1 43.3 46.4 35.1 38.8 41.9 45.1 48.2 43.2 46.9 50.0 53.2 56.3 40.9 44.6 47.7 50.9 54.0 40.9 44.6 47.7 50.9 54.0 31.7 35.4 38.5 41.7 44.8 23.0 26.7 29.8 33.0 36.1
RE 10, 0.75 W 132 ENX 10 GAMA 497
RE 10, 0.75 W 132 ENX 10 IMR RE 10, 0.75 W 132 MR RE 10, 1.5 W 133/134 RE 10, 1.5 W 134 ENX 10 IMR RE 10, 1.5 W 134 MR
500 532
RE 10, 1.5 W 134 ENX 10 GAMA 497
500 532
A-max 12
169/170
EC 9.2 flat, 0.5 W 319
414 maxon gear
© 2025 maxon. All rights reserved. March edition. Subject to change.
Made with FlippingBook Publishing Software