ENX 10 EASY / QUAD Encoder ∅ 10 mm, 1...1024 CPT
Key data
EASY incremental differential
QUAD incremental
Number of channels Max. counts per turn Encoder length L4 Ambient temperature
3
2 1
1024 8.5
mm °C
9.0 <5
-40…+100
-40…+100
Weight
g
<5
Selection criteria
EASY incremental differential
QUAD incremental
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage Vcc Typical current draw Max. operating frequency
EASY incremental differential
QUAD incremental
V
5 ±0.5 1600 30 000 22
3.3 – 24
mA kHz rpm
5.5
2
Max. speed Connector
30 000
10-pin 1.27 mm multipoint connector e.g. Samtec FFSD series Pin 1 do not connect¹ (BiSS-C Data) Pin 2 V CC Pin 3 GND Pin 4 do not connect¹ (BiSS-C CLK)
10-pin 2.54 mm multipoint connector (IEC/EN 60603-13 / DIN41651) Pin 1 not connected Pin 2 V CC
Pin 3 channel A Pin 4 channel B Pin 5 GND
Pin 5 channel A Pin 6 channel A Pin 7 channel B Pin 8 channel B Pin 9 channel I Pin 10 channel I
Pin 6 not connected Pin 7 not connected Pin 8 not connected Pin 9 not connected Pin 10 not connected Output signal: TTL compatible Output current per channel: +10 mA
1
1
9
9
2
2
10
10
Output signal: EIA-Standard RS 422 Output current per channel: ±20 mA
Configuration Counts per turn² Electrical connection Cable length
1…1024 1 50, 100, 150, 200, 300, 500, 1000 / FFC3: 138 mm 50, 100, 150, 200, 300, 500, 1000 15 15 EASY incremental differential Flat band cable / flexible cable FFC³ QUAD incremental Connector 6-pin, 10-pin
mm Alignment of cable outlet in relation to motor flange °
Modular system DC Motors
Page Dimensions standard configuration
M 1:1 Notes
269 ECX PRIME 16 M6 270 ECX PRIME 16 L6 BLDC Motors
¹ Applying voltage to these pins can destroy the encoder. ² maxon controllers require a resolution of at least 16 counts per turn. ³ FFC cable: 0.5 mm pitch, possible matching connector Molex 52745-1097; adapter 506579 required for maxon controllers. 4 For attachment to DCX motors: plus 2-4 mm thick intermediate plate. 5 No combination with 10 EASY, see page 66. 6 No combination with 10 QUAD, see page 58.
DCX 10 S DCX 10 L DCX 12 S DCX 12 L DCX 14 L DCX 16 S DCX 16 L DCX 19 S
182 184
271 272
273–274 275–276 277–278 279–280 281–282 283–284 285–286
DCX 22 S DCX 22 L DCX 26 L DCX 32 L DCX 35 L DC-max 16 S DC-max 22 S
287 288 295
297 DC-max 26 S5 299–300
Further technical details can be found in the product information in the online shop under Downloads.
418 maxon
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software