ENX 16 EASY Encoder ∅ 16 mm, 1…1024 CPT
Key data
EASY incremental differential
Number of channels Max. counts per turn Encoder length L² Ambient temperature
3 1024 8.5 –40…+100 7
mm °C
Weight
g
Selection criteria
EASY incremental differential
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage V CC Typical current draw Max. operating frequency
EASY incremental differential
V
5 ±0.5 22 1600 30 000
mA kHz rpm
Max. speed Connector
10-pin 2.54 mm multipoint connector (IEC/EN 60603-13 / DIN41651) Pin 1 not connected Pin 2 V CC Pin 3 GND Pin 4 not connected
1
9
2
Pin 5 channel A Pin 6 channel A Pin 7 channel B Pin 8 channel B Pin 9 channel I Pin 10 channel I
10
Output signal: EIA-Standard RS 422 Output current per channel: ±20 mA
Variants Part number Counts per turn 1 Cable length
for configurable units depends on configuration
non-configurable units
499356 499357 499358 499359 499360 499361 128 256 500 512 1000 1024 300 300 300 300 300 300
1…1024
15 mm Alignment of cable outlet in relation to motor flange ° (pitch)
50, 100, 150, 200, 300, 500, 1000
0
0
0
0
0
0
Modular system
Page Dimensions standard version
M 1:1 Notes
DCX 16 S DCX 16 L DCX 19 S DCX 22 S DCX 22 L DCX 26 L DCX 32 L DCX 35 L DC Motors
BLDC Motors
¹ maxon controllers require a resolution of at least 16 counts per turn. ² Length given excludes any intermediate plate for mounting on a motor. The effective total length of a motor-encoder combination can be found on the respective dimensional drawing.
275–276 EC-max 16 277–278 EC-max 22
175/176 177–178
279–280 ECX PRIME 16 M 281–282 ECX PRIME 16 L 283–284 ECX PRIME 22 M 285–286 ECX PRIME 22 L 287 ECX PRIME 30 L
182 184 186 188 190
288 EC-i 30
197–200 201–206 207–208
DC-max 26 S 299–300 EC-i 40
EC-i 52 EC-i 70
209
Further technical details can be found in the product information in the online shop under Downloads.
420 maxon
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software