Brake AB 60 S 24 VDC, 5.0 Nm
Important information • Spring-loaded brake – single-disc brake with two friction surfaces for direct current. Braked in unpowered condition (dry operation). • Holding brake, prevents rotation of the shaft at standstill or with turned off motor power. • Not suitable for dynamic braking. • Not backlash-free (±1° max.). • The brake is supplied without an additional housing. • The brake has no ingress protection against water or dirt (IP00), and it is the user's responsibility to protect the brake appropriately to ensure proper operation
Stock program Standard program Special program (on request)
Part numbers
763198
Type
overall length
overall length
Modular system + Motor
+ Gearhead
+ Sensor
209 Page
Page
Page
∅ AB [mm] Overall length [mm] / • see Gearhead
EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70 EC-i 70
60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0 60.0
158.5 216.5 238.5 291.7 319.7 332.7 189.8 247.8 269.8 323.0 351.0 364.0
209 GPX 70 3.9:1 -6.6:1 371–372
209 GPX 70 16:1-44:1 209 GB 12
371–372
399 400 401
209 GB 9 209 GB 65
209
ENX 22 EMT 438
209 GPX 70 3.9:1 -6.6:1 371–372 ENX 22 EMT 438
209 GPX 70 16:1-44:1 209 GB 12
371–372 ENX 22 EMT 438
399 400 401
ENX 22 EMT 438 ENX 22 EMT 438 ENX 22 EMT 438
209 GB 9 209 GB 65
Technical data Holding torque Mass inertia Max. speed
Pin allocation
24 VDC -10...+5% Cable
Designation Plug position U Brake + 24 VDC No. 1
5 Nm Nominal voltage, smoothed
25 gcm2 Resistance 8800 rpm Duty cycle
R20 = 41.16 Ω 0...+10% red
100% black
U Brake GND
No. 2
≤ 75 ms Connector Molex ≤ 75 ms Cable length: 150 mm ±5 mm
Weight
480 g Reaction time
– Coupling – Opening
436150200
Ambient temperature range
-40…+120 °C
482 maxon
© 2026 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software