Screw Drive Options
Option
to GP 6 S
to GP 8 S
Without specification, the screw is supplied in the standard length 45 mm. Special lengths can be ordered in 5 mm steps up to the stated maximum length.
Without specification, the screw is supplied in the standard length 56 mm. Special lengths can be ordered in 5 mm steps up to the stated maximum length.
Special length Reference FLEX-GEAR-SPIN02/03
FLEX-GEAR-SPIN04/05
Configurable length
Configurable length
Screw end Reference FLEX-GEAR-SPIN06 In order to support the end of the screw by an additional bearing, it can be delivered according to the illustration. Customer specific screw ends on request.
2.5
2
2x Ø1.8
8
8
2x Ø1.8
Flange nut Reference FLEX-GEAR-SPIN08 Flange nut instead of the standard thread nut.
2
0 -0.1
0 -0.1
2
5.4
3
7
3
Low backlash ball screw nut Reference FLEX-GEAR-SPIN09
Not available for GP 6 S.
Not available for GP 8 S.
Rectangular mounting flange Reference FLEX-GEAR-SPIN10 Screw drive with rectangular moun- ting flange allows mounting from the gearhead side.
maxon screw drive 487
© 2024 maxon. All rights reserved. September edition. Subject to change.
Made with FlippingBook Publishing Software