ENX 4 MAG Encoder ∅ 4 mm, 1…256 CPT
Key data
ENX 4 MAG incremental, commutation signal
Number of channels Max. counts per turn Additional length at motor Ambient temperature
3 256 2.7 -40…100 1
mm °C
Weight
g
Selection criteria
ENX 4 MAG incremental, commutation signal
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage Vcc Typical current draw Max. operating frequency
ENX 4 MAG incremental, commutation signal
V
3.0…3.6 13 500 100 000
mA kHz rpm
Max. Speed Connection3
FPC, 12 pole, pitch 0.5 mm Pin 1 W1 Pin 2 W2 Pin 3 W3 Pin 4 GND Pin 5 V CC Pin 6 channel A Pin 7 channel B Pin 8 channel I Pin 9 H1 Pin 10 H2 Pin 11 H3 Pin 12 do not connect 1
Output signal: CMOS compatible Output current per channel: ±4 mA
Configuration Counts per turn 2
ENX 4 MAG incremental, commutation signal
1...256
EC motor ECX SPEED 4 M ECX SPEED 4 L modular system
Page Dimensions standard version
M 1:1 Notes
1 Applying voltage to these pins may destroy the encoder. 2 maxon controllers require a resolution of at least 16 counts per turn. ³ H1, index and angle zero are aligned with angle commutation zero (see p. 64). Compatible connector: Molex 52745-1297, TE 1-1734839-2 Adapter 498157 required for all maxon controllers Please note: max. continuous current 0.5 A
enx4-mag.pdf 1 02.12.2019 09:32:59
191 192
Further technical details can be found in the product information in the online shop under Downloads.
maxon sensor 497
© 2024 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software