ENX 10 MAG INT Encoder ∅ 10 mm, 1…256 CPT Integrated into motor
Key data
ENX 10 MAG INT incremental, commutation signal
Number of channels Max. counts per turn Additional length at motor Ambient temperature
3 256 -40…100 2
mm 0 (integrated into motor)
°C
Weight
g
Selection criteria
ENX 10 MAG INT incremental, commutation signal
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage Vcc Typical current draw Max. operating frequency
ENX 10 MAG INT incremental, commutation signal
V
3.3…6.0 13 500 100 000
mA kHz rpm
Max. Speed Connection3
FPC Pin 1 W1 Pin 2 W2 Pin 3 W3 Pin 4 GND Pin 5 V CC
Pin 6 channel A Pin 7 channel B Pin 8 channel I Pin 9 H1 Pin 10 H2 Pin 11 H3 Pin 12 do not connect1
Output signal: CMOS compatible Output current per channel: ±4 mA
Configuration Counts per turn 2
ENX 10 MAG INT incremental, commutation signal
1...256
EC motor ECX SPEED 10 M modular system
Page Dimensions standard version
M 1:1 Notes
1 Applying voltage to these pins may destroy the encoder. 2 maxon controllers require a resolution of at least 16 counts per turn. ³ H1, index and angle zero are aligned with angle commutation zero (see p. 64). Maximum permissible continuous current in the flexprint cables to W1, W2, W3: 24-pole, 0.5 mm pitch, e.g., Molex 52207-2460 Adapter from flexprint cable to screw terminal, part no.: 804420
197
Further technical details can be found in the product information in the online shop under Downloads.
500 maxon sensor
© 2024 maxon. All rights reserved. April edition. Provisional data. Subject to change.
Made with FlippingBook Publishing Software