ENX 32 IMR Encoder ∅ 32 mm, 256...1024 CPT
Key data
IMR 3-channel differential
Number of channels Max. counts per turn Encoder length L1 Ambient temperature
3 1024 11 -20…+85 12
mm °C
Weight
g
Selection criteria
IMR 3-channel differential
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage V CC Typical current draw Max. operating frequency
IMR 3-channel differential
V
5 ±0.5 13 320 18 750
mA kHz rpm
Max. Speed Connector
10-pin 2.54 mm multipoint connector (IEC/EN 60603-13 / DIN41651) Pin 1 not connected Pin 2 V CC Pin 3 GND Pin 4 not connected
1
9
2
Pin 5 channel A Pin 6 channel A Pin 7 channel B Pin 8 channel B Pin 9 channel I Pin 10 channel I
10
Output signal: EIA-Standard RS 422 Output current per channel: ±20 mA
Variants
IMR 3-channel differential
870722 870725 870723 870726 870724 256 500 512 1000 1024 506 506 506 506 506
Part Number Counts per turn Cable length
mm
modular system
Page Dimensions standard version
Notes 1Length given excludes any intermediate plate for mounting on a motor. The effective total length of a motor-encoder combination can be found on the respective dimensional drawing.
M 1:2
DC motor RE 30 RE 35 RE 40 A-max 32
159–160 162–163 187–188 161
Further technical details can be found in the product information in the online shop under Downloads.
506 maxon sensor
© 2025 maxon. All rights reserved. February edition. Provisional data. Subject to change.
Made with FlippingBook Publishing Software