ENX 10 EASY XT Encoder ∅ 10 mm, 1...1024 CPT
Key data
EASY incremental single-ended
Number of channels Max. counts per turn Encoder length L² Ambient temperature
3 1024 8.5 -55…+125 <5
mm °C
Weight
g
Selection criteria
EASY incremental single-ended
Speed and rotation direction detection Speed and position control Compact and robust design
High resolution Cost effective
suitable
suitable to a limited extent
not suitable
Specifications Supply voltage Vcc Typical current draw Max. operating frequency
EASY incremental single-ended
V
5 ±0.5 22 1600 30 000
mA kHz rpm
Max. Speed Connector
10-pin 2.54 mm multipoint connector (IEC/EN 60603-13 / DIN41651) Pin 1 not connected Pin 2 V CC Pin 3 GND Pin 4 not connected Pin 5 not connected Pin 6 channel A Pin 7 not connected Pin 8 channel B Pin 9 not connected Pin 10 channel I Output signal: TTL compatible Output current per channel: +10 mA
1
2
9
10
Configuration Counts per turn¹ Cable length
EASY incremental single-ended
1…024 300 15
mm Alignment of cable outlet in relation to motor flange °
Modular system
Page Dimensions standard configuration
M 1:1 Notes
DC motor DCX 10 S DCX 10 L DCX 12 S DCX 12 L DCX 14 L DCX 16 S DCX 16 L
EC motor
¹ maxon controllers require a resolution of at least 16 counts per turn. ² For attachment to DCX motors: plus 2-4 mm thick intermediate plate.
99 ECX PRIME 16 M 236 100 ECX PRIME 16 L 237
101 102
103–104 105–106 107–108
DCX 19 S 109–110 DCX 22 S 111–112 DCX 22 L 113–114 DCX 26 L 115–116 DCX 32 L 117 DCX 35 L 118
Further technical details can be found in the product information in the online shop under Downloads.
508 maxon sensor
© 2025 maxon. All rights reserved. February edition. Subject to change.
Made with FlippingBook Publishing Software