EPOS4 Positioning Controllers Data
EPOS4 Compact 50/5 EtherCAT Ready-to-install compact solution, designed for use with brushed DC motors with encoders or brushless EC motors with Hall sensors and encoders up to 250/750 Watt.
EPOS4 Compact 50/8 CAN Ready-to-install compact solution, designed for use with brushed DC motors with encoders or brushless EC motors with Hall sensors and encoders up to 400/1500 Watt.
EPOS4 Compact 50/5 CAN Ready-to-install compact solution, designed for use with brushed DC motors with encoders or brushless EC motors with Hall sensors and encoders up to 250/750 Watt.
Controller version CANopen Slave Electrical data 10 - 50 VDC 10 - 50 VDC
EtherCAT Slave
CANopen Slave
10 - 50 VDC 10 - 50 VDC 0.9 x V CC 15 A (<3 s)
10 - 50 VDC 10 - 50 VDC 0.9 x V CC 30 A (<5 s)
0.9 x V CC 15 A (<3 s)
5 A
5 A
8 A
50 kHz
50 kHz
50 kHz
25 kHz (40 µs) 2.5 kHz (400 µs) 2.5 kHz (400 µs)
25 kHz (40 µs) 2.5 kHz (400 µs) 2.5 kHz (400 µs)
25 kHz (40 µs) 2.5 kHz (400 µs) 2.5 kHz (400 µs)
50 000 rpm (sinusoidal), 100 000 rpm (block)
50 000 rpm (sinusoidal), 100 000 rpm (block)
50 000 rpm (sinusoidal), 100 000 rpm (block)
9.4 μ H / 5 A Inputs H1, H2, H3
10 μ H / 5 A H1, H2, H3
2.2 μ H / 15 A
H1, H2, H3
A, A\, B, B\, I, I\ (max. 6.25 MHz) A, A\, B, B\, I, I\, Clock, Clock\, Data, Data\ 4 (level switchable: logic/PLC)
A, A\, B, B\, I, I\ (max. 6.25 MHz) A, A\, B, B\, I, I\, Clock, Clock\, Data, Data\ 4 (level switchable: logic/PLC)
A, A\, B, B\, I, I\ (max. 6.25 MHz) A, A\, B, B\, I, I\, Clock, Clock\, Data, Data\ 4 (level switchable: logic/PLC)
4, differential
4, differential
4, differential
2 (12-bit resolution, -10…+10 V) configurable with DIP switch 1…5
2 (12-bit resolution, -10…+10 V) configurable with DIP switch 1…5
2 (12-bit resolution, -10…+10 V) configurable with DIP switch 1…5
Outputs 2
2
2
1, differential
1, differential
1, differential
2 (12-bit resolution, -4…+4 V, max. 1 mA)
2 (12-bit resolution, -4…+4 V, max. 1 mA)
2 (12-bit resolution, -4…+4 V, max. 1 mA)
+5 VDC, max. 70 mA +5 VDC, max. 30 mA +5 VDC, max. 145 mA Interfaces high; low (max. 1 Mbit/s)
+5 VDC, max. 70 mA +5 VDC, max. 30 mA +5 VDC, max. 145 mA
+5 VDC, max. 70 mA +5 VDC, max. 30 mA +5 VDC, max. 145 mA high; low (max. 1 Mbit/s)
– –
–
100 Mbit/s (Full Duplex)
–
RxD; TxD (max. 115 200 bit/s) Data+; Data- (Full Speed) Indicator Green LED, red LED Environmental conditions -30…+25°C +25...+70°C; Derating: -0.111 A/°C
RxD; TxD (max. 115 200 bit/s) Data+; Data- (Full Speed)
Data+; Data- (Full Speed)
Green LED, red LED
Green LED, red LED
-30…+25°C -40…+85°C 5…90% approx. 76 g M2.5 screws
-30…+45°C -40…+85°C 5…90% approx. 86 g M2.5 screws
+25...+70°C; Derating: -0.111 A/°C
+45...+77°C; Derating: -0.250 A/°C
-40…+85°C 5…90%
Mechanical data approx. 58 g 55.0 x 40.0 x 31.1 mm
55.0 x 56.5 x 31.7 mm
59.5 x 58.5 x 33.0 mm
M2.5 screws
Part numbers 541718 EPOS4 Compact 50/5 CAN Accessories 309687 DSR 50/5 Shunt regulator
628094 EPOS4 Compact 50/5 EtherCAT
520885 EPOS4 Compact 50/8 CAN
309687 DSR 50/5 Shunt regulator 235811 DSR 70/30 Shunt regulator Order accessories separately, see page 578 Order accessories separately, see page 578 Order accessories separately, see page 578
maxon motor control 565
© 2024 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software