Brake AB 28 24 VDC, 0.4 Nm
Important information • Permanent magnet — single-face brake for DC (dry operation). Braking in unpowered condition. • Holding brake, prevents rotation of the shaft at standstill or with turned off motor power. • Not suitable for dynamic braking. • It is possible to lower the voltage applied to the brake after it has been energized, for the purpose of reducing heat loss. • Schematic image: does not necessarily reflect the delivery state.
Stock program Standard program Special program (on request)
Part numbers
301215
Type
overall length
overall length
Modular system + Motor
Page + Gearhead
+ Sensor
Page
Page
∅ AB [mm] Overall length [mm] / • see Gearhead
EC-max 40, 70 W 286 EC-max 40, 70 W 286 EC-max 40, 120 W 287
40 40 40 40 40 40 40 40 40 40
92.4
EC-max 40, 70 W 286 GP 42, 3 - 15 Nm 440–441
•
HEDL 5540 539
110.7 122.4 •
EC-max 40, 70 W 286 GP 42, 3 - 15 Nm 440–441 HEDL 5540 539
EC-max 40, 120 W 287 GP 42, 3.0 - 15.0 Nm 440–441 EC-max 40, 120 W 287 GP 52, 4 - 30 Nm 444
• • • •
EC-max 40, 120 W 287
HEDL 5540 539 HEDL 5540 539
140.7
EC-max 40, 120 W 287 GP 42, 3.0 - 15.0 Nm 440–441 HEDL 5540 539 EC-max 40, 120 W 287 GP 52, 4 - 30 Nm 444
Technical data Holding torque Mass inertia Max. speed
Pin allocation
24 VDC ±10% Cable (AWG 26)
Designation U Brake +24 VDC U Brake GND
0.4 Nm Nominal voltage, smoothed
10 gcm2 Resistance 16 000 rpm Duty cycle
R20 = 92.5 Ω ±6% red
100% blue
– Coupling – Opening
≤ 13 ms
Weight
0.05 kg Reaction time
≤ 27 ms Min. cable length
350 mm
586 maxon accessories Ambient temperature range
-5…+85°C
© 2025 maxon. All rights reserved. February edition. Subject to change.
Made with FlippingBook Publishing Software