Brake AB 41 24 VDC, 2.0 Nm
Important Information • Permanent magnet – single-face brake for DC (dry operation). Braking in unpowered condition. • Holding brake, prevents rotation of the shaft at standstill or with turned off motor power. • Not suitable for dynamic braking.
Stock program Standard program Special program (on request)
Part Numbers
228998
Type
overall length
overall length
Modular System + Motor
Page + Gearhead
+ Sensor
Page
Page
Overall length [mm] / • see Gearhead
EC 60, 400 W 271 EC 60, 400 W 271
190.9 214.9 •
EC 60, 400 W 271 GP 81, 15.4 - 92.3 Nm 460
HEDL 9140 540
EC 60, 400 W 271 GP 81, 15.4 - 92.3 Nm 460 HEDL 9140 540
•
Technical Data Holding torque Mass inertia Max. speed
Pin Allocation
from motor clamp Designation
2.0 Nm Nominal voltage, smoothed
24 VDC -10 ... +6%
R20 = 72 Ω ±7% Cable red No 4 (AWG 16) 100% Cable black No 5 (AWG 16)
U Brake + 24 VDC U Brake GND
45 gcm2 Resistance 10 000 rpm Duty cycle
– Coupling – Opening
≤ 2 ms
Weight
0.18 kg Reaction time
≤ 25 ms Min. cable length
500 mm
Ambient temperature range
-5…+85°C
588 maxon accessories
© 2024 maxon. All rights reserved. April edition. Subject to change.
Made with FlippingBook Publishing Software