ECX 13 connecting cable The connecting cable fits ECX 13 that are configured with a pin and external thread. Details about the motor can be found on pages 198–205 and online at www.maxongroup.com. Characteristics: • Steel housing • Withstands 1000 sterilization cycles in the autoclave • Silicone outer shell • PTFE cable insulation • Electrical conductors with cable end sleeves • A motor cables shielded. The shielding is fitted with heat shrink tubing and cable end sleeve. ECX 13 connecting cable Part number Cable version 585750 ECX 13 connecting cable, type A: for motors with Hall sensors or for versions with encoders 592191 ECX 13 connecting cable, type B: for motors without Hall sensors and without encoders 595698 ECX 13 connector set (without cable)
A
B
Cable and pin assignment, type B Color Pin AWG 22 red 1 black 2 white 3 AWG 26 pink 9 purple 10
Cable and pin assignment, type A Color Pin AWG 22 red 1 black 2 white 3 AWG 26 orange 4 blue 5 yellow 6 brown 7 grey 8 pink no pin purple no pin green no pin
maxon accessories 593
© 2024 maxon. All rights reserved. June edition. Subject to change.
Made with FlippingBook Publishing Software